Functional Fluid, Lubricant, Grease (including Additives)

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. Protects against uneven pad wear.

Disc Brake Quiet forms a water resistant, high-temperature film that absorbs noise while quieting squeaks & squeals. Specially formulated to dampen the vibrations that cause brake noise. For use on the back of non-shimmed disc pads.

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

A unique formula that immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks rusted surfaces, allowing Freeze-Off® to reach deeper & work more effectively than other penetrants. Low VOC Formula.

A specially developed synthetic grease with a high-tech formula for use in disc & drum brake systems. High temperature grease is plastic & rubber safe. Use on metal to metal contact points and sliding surfaces. Resists moisture and will not washout.

Shell Rotella T4 15w-40 (Formerly Shell Rotella T Triple Protection) uses the latest "Low-SAPS" additive technology to protect under the most severe conditions found in modern low emission engines. The protective power of the oil is enhanced through the use of high purity "Group II" base oils that provide increased additive activity. Shell Rotella T4 15w-40 delivers significant improvements in wear protection deposit control and resistance to breakdown under high temperatures. The exclusive low-ash formulation helps protect the exhaust catalysts and particulate traps found on the latest low emission vehicles. Recommended by a wide range of OEMs suitable for both the latest low-emissions and older model equipment.

Shell ROTELLA® T6 5W-40 Full Synthetic Heavy Duty Engine Oil with Triple Protection Plus technology delivers all the protection youve come to expect from Shell ROTELLA® and then some. It not only meets but exceeds API CK-4 performance standards. The use of Shells most advanced technology Shell ROTELLA® T6 5W-40 full synthetic heavy duty engine oil offers enhanced fuel economy that can save money in fuel consumption without compromising engine protection or durability. Shell ROTELLA® T6 5W-40 full synthetic (CK-4) provides excellent protection against harmful engine wear. In 30 API CK-4 and OEM wear test parameters and 10 separate passing engine tests the average result for Shell ROTELLA® T6 5W-40 was 50% of the respective limit. The advanced multi-functional dispersant additives in combination with synthetic base oils provide an enhanced level of protection against the effects of soot dirt and other contaminants compared to conventional heavy duty diesel engine oil.

Shell Rotella T4 15w-40 (Formerly Shell Rotella T Triple Protection) uses the latest "Low-SAPS" additive technology to protect under the most severe conditions found in modern low emission engines. The protective power of the oil is enhanced through the use of high purity "Group II" base oils that provide increased additive activity. Shell Rotella T4 15w-40 delivers significant improvements in wear protection deposit control and resistance to breakdown under high temperatures. The exclusive low-ash formulation helps protect the exhaust catalysts and particulate traps found on the latest low emission vehicles. Recommended by a wide range of OEMs suitable for both the latest low-emissions and older model equipment.

Shell ROTELLA® T5 10W-30 Synthetic Blend is suitable for a wide range of heavy-duty engine applications. With its wide range of specifications and approvals from many of the worlds leading engine makers it is an excellent choice for on-highway fleets construction agriculture and diesel pick-up trucks including high-power vehicles where resistance to increased heat and stress is required. Triple Protection Plus is the unique combination of Triple Protection and Shell Pure Plus Technology. Shell Pure Plus Technology is a process that produces a 99.5% pure base oil which allows proprietary additives to work at maximum strength. This unique combination provides optimum protection as well as increased fuel efficiency and reduced maintenance costs on the road. Shell ROTELLA® T5 10W-30 Synthetic Blend works even harder than new CK-4 specifications require. It is proven to provide excellent performance across API CK-4 wear tests delivering an average of 44% better than the maximum wear requirements. In extensive real world field testing over 500000 miles and with long drain intervals Shell ROTELLA® T5 10W-30 Synthetic Blend proved that a thinner viscosity can protect as well as Shell ROTELLA® T4 Triple Protection® heavy duty engine oil 15W-40.

Shell Rotella T4 15w-40 (Formerly Shell Rotella T Triple Protection) uses the latest "Low-SAPS" additive technology to protect under the most severe conditions found in modern low emission engines. The protective power of the oil is enhanced through the use of high purity "Group II" base oils that provide increased additive activity. Shell Rotella T4 15w-40 delivers significant improvements in wear protection deposit control and resistance to breakdown under high temperatures. The exclusive low-ash formulation helps protect the exhaust catalysts and particulate traps found on the latest low emission vehicles. Recommended by a wide range of OEMs suitable for both the latest low-emissions and older model equipment.