Functional Fluid, Lubricant, Grease (including Additives)

DISCONTINUED USE 20248

Lubrication is usually done with only a thin film of lubricant and 5th Wheels are no exception. No matter how much grease you pile on a 5th wheel, only a thin film remains after the weight of a trailer settles on it. So why not put on a thin film to start. Lucas 5th Wheel & Slider Lube is a clean, inexpensive alternative to grease. It has a film strength many times stronger than grease. It is slicker than grease, and it?s waterproof. Since it is not a grease, it will not leave gooey soap behind after the lubricant is exhausted. This performance feature will help minimize maintenance issues in the lock mechanisms associated with the crusty, cruddy soap remaining in the system. Snip the tip on the 16 oz. bottle and string over the dry spot on the 5th Wheel. On slider rails, squeeze the bottle as you drag the tip down the slider rail. One thin string is all that is necessary. Move the trailer back and forth on the slider rail to spread the lube. This should provide months of easy sliding. Remember... dry 5th wheels are a major cause of front tire wear, front end wear, spring bushing wear and jack-knifing.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Ultra Slick adheres to component surfaces to prevent scuffing and galling during initial start-up. This high quality formulation meets or exceeds OEM performance specs for engine assembly lubricants.