Functional Fluid, Lubricant, Grease (including Additives)

Lubrication is usually done with only a thin film of lubricant and 5th Wheels are no exception. No matter how much grease you pile on a 5th wheel, only a thin film remains after the weight of a trailer settles on it. So why not put on a thin film to start. Lucas 5th Wheel & Slider Lube is a clean, inexpensive alternative to grease. It has a film strength many times stronger than grease. It is slicker than grease, and it?s waterproof. Since it is not a grease, it will not leave gooey soap behind after the lubricant is exhausted. This performance feature will help minimize maintenance issues in the lock mechanisms associated with the crusty, cruddy soap remaining in the system. Snip the tip on the 16 oz. bottle and string over the dry spot on the 5th Wheel. On slider rails, squeeze the bottle as you drag the tip down the slider rail. One thin string is all that is necessary. Move the trailer back and forth on the slider rail to spread the lube. This should provide months of easy sliding. Remember... dry 5th wheels are a major cause of front tire wear, front end wear, spring bushing wear and jack-knifing.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

Lucas Transmission Fix contains no solvents or anything else that would be harmful to an automatic transmission. It is a thermal stable blend of petroleum-extracted additives designed to correct existing problems and prevent new ones in automatic transmissions. Lucas Transmission Fix stops slip, hesitation and rough shifting in worn transmissions. It completely eliminates most seal leaks and lowers operating temperatures in hard working units. A must for motor homes and commercial vehicles. Lucas Transmission Fix is excellent for preventative maintenance and will extend fluid life up to four times longer. It also extends needed protection to planetary gears. One 24 oz. bottle of Lucas Transmission Fix can be added to existing fluid without draining. A second bottle may be necessary in large or badly worn transmissions. In smaller transmissions (compact or sub-compact vehicles), use 12 oz. Lucas Transmission Fix is also excellent for light duty manual transmissions using automatic transmission fluid or motor oil as a lubricant. For easier shifting and extended transmission life drain transmission, install one 24-ounce bottle of Lucas Transmission Fix and top off with A.T.F. or motor oil.

Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Ultra Slick adheres to component surfaces to prevent scuffing and galling during initial start-up. This high quality formulation meets or exceeds OEM performance specs for engine assembly lubricants.