Functional Fluid, Lubricant, Grease (including Additives)

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

Lucas Transmission Fix contains no solvents or anything else that would be harmful to an automatic transmission. It is a thermal stable blend of petroleum-extracted additives designed to correct existing problems and prevent new ones in automatic transmissions. Lucas Transmission Fix stops slip, hesitation and rough shifting in worn transmissions. It completely eliminates most seal leaks and lowers operating temperatures in hard working units. A must for motor homes and commercial vehicles. Lucas Transmission Fix is excellent for preventative maintenance and will extend fluid life up to four times longer. It also extends needed protection to planetary gears. One 24 oz. bottle of Lucas Transmission Fix can be added to existing fluid without draining. A second bottle may be necessary in large or badly worn transmissions. In smaller transmissions (compact or sub-compact vehicles), use 12 oz. Lucas Transmission Fix is also excellent for light duty manual transmissions using automatic transmission fluid or motor oil as a lubricant. For easier shifting and extended transmission life drain transmission, install one 24-ounce bottle of Lucas Transmission Fix and top off with A.T.F. or motor oil.

Complete kit contains everything required for making professional-quality permanent repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 10 minutes and cure in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs cracks up to 4" in length and holes up to 3/8 " in diameter. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. Fast curing product with gelling of mixed adhesive in 5 6 minutes and fixturing in 9 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125". Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.