Functional Fluid, Lubricant, Grease (including Additives)

Lubrication is usually done with only a thin film of lubricant and 5th Wheels are no exception. No matter how much grease you pile on a 5th wheel, only a thin film remains after the weight of a trailer settles on it. So why not put on a thin film to start. Lucas 5th Wheel & Slider Lube is a clean, inexpensive alternative to grease. It has a film strength many times stronger than grease. It is slicker than grease, and it?s waterproof. Since it is not a grease, it will not leave gooey soap behind after the lubricant is exhausted. This performance feature will help minimize maintenance issues in the lock mechanisms associated with the crusty, cruddy soap remaining in the system. Snip the tip on the 16 oz. bottle and string over the dry spot on the 5th Wheel. On slider rails, squeeze the bottle as you drag the tip down the slider rail. One thin string is all that is necessary. Move the trailer back and forth on the slider rail to spread the lube. This should provide months of easy sliding. Remember... dry 5th wheels are a major cause of front tire wear, front end wear, spring bushing wear and jack-knifing.

Lucas Pure Synthetic Oil Stabilizer is perfect for use in new equipment that requires synthetic oil or any equipment that needs enhanced performance. It can be used to protect new and used heavy duty and high performance transmissions, gear boxes and engines. This product controls heat and wear in motorcycles, air-cooled engines and all drive-train components. Lucas Pure Synthetic Oil Stabilizer reduces friction for more power and more MPG. It eliminates dry starts in new engines and provides the extra protection needed for import and domestic engines requiring newer, lighter engine oils. Lucas Pure Synthetic Oil Stabilizer was originally designed for the racing industry. Light, slick and long-lasting with a film strength that stands up to high temperatures and pressures in extreme situations and since it?s pure synthetic, it won?t void warranties! Lucas Pure Synthetic Oil Stabilizer controls noise, heat and wear in manual transmissions, differentials and transfer cases. It stabilizes oil pressure for better performance in today?s electronically controlled gasoline and diesel engines. It eliminates hesitation, rough idle, stalling and loss of fuel mileage caused by low or fluctuating oil pressure. No special limited slip additive needed when used in differentials. In badly whining differentials use our original Heavy Duty Oil Stabilizer. Use Lucas Pure Synthetic Oil Stabilizer in cold weather applications for easier cranking and maximum protection from all wear problems associated with cold dry starts.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Lucas Hydraulic Oil Booster & Stop Leak is a one of a kind, long lasting blend of oils and petroleum extracted additives that add lubricity and thermal stability to any hydraulic oil. Lucas Hydraulic Oil Booster & Stop Leak is an excellent preventative maintenance product at a treat rate of only about 5%, adding life to pumps, rams, seals and the treated hydraulic fluid. This product is unsurpassed at correcting existing problems. A 10% to 20% treat rate is usually all that is needed to stop all seal leaks. A 10% to 20% addition is usually all that's needed to restore full hydraulic pressure to a worn system. It also removes varnish from wet brakes and stops slip in automatic transmissions. It is impregnated with anti-foam agents.

Lucas TB Zinc-Plus Engine Break-In Oil Additive is designed for all who fear the initial break-in period of any new motor, especially if they are running a flat tappet camshaft. After reviewing our customer service requests, we found that many of our customers had requested an additive package that would protect the new or rebuilt hot rod or race motor they have built. The new Lucas Oil TB Zinc-Plus has an additive package that will help seat in the new rings while providing an excellent extreme pressure additive package that will help protect the entire valve train, and of course, the camshaft. We have found through dyno testing that the engines do, in fact, break-in much faster with less blow by, and will require less time on the dyno prior to installing in your hot rod or race car. The new TB Zinc-Plus is also safe for use in any racing situation to increase your extreme pressure additives in any conventional or synthetic motor oil. Remember: Lucas Engine Break-In Oil Additive TB Zinc-Plus protects camshaft lifters and valve train during break-in period of motors. It is excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear. It contains an exclusive blend of extreme pressure additives and is designed for race lications

Lucas Power Steering Fluid with Conditioners is formulated with the highest quality synthetic base oils and additives to help prevent power steering unit leaks, provide smooth operation and eliminate squealing. Our unique chemistry prolongs fluid life, improves fluid shear stability and improves fluid oxidation to minimize sludge and varnish formation. It reduces parts wear and extends equipment life. It cleans and smoothes internal springs and valves to help eliminate sticking and conditions seals to minimize or stop small leaks. Lucas Power Steering Fluid with Conditioners also reduces sluggish operation and noise and chatter. It contains an effective foam inhibitor and maintains cold temperature properties for power steering fluid. Designed for use in both new and older vehicles. Can be used in Honda Systems.

Lucas Fuel Treatment is for gasoline and diesel fuel. It does not contain alcohol, solvents, kerosene, diesel fuel or anything else that would be useless or harmful to engines. Low sulphur diesel fuel and reformulated gasolines have had the polymers removed from them, not because the polymers were harmful but because they were attached to the aromatics (fumes) in the fuels. In their zest to rid our air of gasoline and diesel fumes, our government has stripped our fuel of its main lubricants and, in the process, a great deal of its power. It replaces those polymers with a concentrate that makes the fuel slicker and more powerful than it was originally. In fact, the user usually picks up more than enough fuel mileage to pay for the fuel treatment itself. Lucas Fuel Treatment lubricates rings and cylinder walls for longer life. It causes more combustion for more power and higher fuel mileage with FEWER EMISSIONS. Lucas Fuel Treatment cleans and lubricates valves, pumps, carburetors, injectors and compression rings. It is an absolute must for rotary pumps! It safely replaces the need for lead in older engines.

Lucas Heavy Duty Oil Stabilizer is a 100% petroleum product developed and perfected through