Functional Fluid, Lubricant, Grease (including Additives)

Fuel Stabilizer is for gasoline engines that keeps stored fuel fresh. For storage and everyday use in all two and four cycle engines.

High performance grease for a wide application range in all motor vehicles and for general machine lubrication. Thanks to added MoS2 it offers outstanding protection during extreme loads and high heat and also adds limp-home properties. For heavily loaded bearings and joints, splined shafts, threads and guides. Ideal for constant velocity drive joints. Certification: acc DIN 51502 KPF 2K-30. Operating temperature range: -65 C to +120 C (-86 F to +248 F), up to +130 C (+266 F) briefly.

Lubrication is usually done with only a thin film of lubricant and 5th Wheels are no exception. No matter how much grease you pile on a 5th wheel, only a thin film remains after the weight of a trailer settles on it. So why not put on a thin film to start. Lucas 5th Wheel & Slider Lube is a clean, inexpensive alternative to grease. It has a film strength many times stronger than grease. It is slicker than grease, and it?s waterproof. Since it is not a grease, it will not leave gooey soap behind after the lubricant is exhausted. This performance feature will help minimize maintenance issues in the lock mechanisms associated with the crusty, cruddy soap remaining in the system. Snip the tip on the 16 oz. bottle and string over the dry spot on the 5th Wheel. On slider rails, squeeze the bottle as you drag the tip down the slider rail. One thin string is all that is necessary. Move the trailer back and forth on the slider rail to spread the lube. This should provide months of easy sliding. Remember... dry 5th wheels are a major cause of front tire wear, front end wear, spring bushing wear and jack-knifing.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Lucas White Lithium Grease is formulated with the highest quality base oils and additives to provide mild extreme pressure properties. The white creamy appearance differentiates it from other products. The product is packaged in 8 ounce squeeze tubes for ease of application. Lucas White Lithium Grease is recommended for use in plain and antifriction bearings operating under moderate load conditions. It is recommended for use in automotive chassis, trucks, tractors and contractor equipment. Not recommended for use in wheel bearings. Our product is truly versatile grease with applications in industrial, automotive and household applications including garage door openers, springs, hinges, etc.

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Use in Autos, Buses, Trucks, Tractors, Outboard Motors, Chain Saws & Construction Equipment. Easier starts for gasoline and diesel engines. Effective at -65?F. Contains upper cylinder lubricant. This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road engines.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

Lucas TB Zinc-Plus Engine Break-In Oil Additive is designed for all who fear the initial break-in period of any new motor, especially if they are running a flat tappet camshaft. After reviewing our customer service requests, we found that many of our customers had requested an additive package that would protect the new or rebuilt hot rod or race motor they have built. The new Lucas Oil TB Zinc-Plus has an additive package that will help seat in the new rings while providing an excellent extreme pressure additive package that will help protect the entire valve train, and of course, the camshaft. We have found through dyno testing that the engines do, in fact, break-in much faster with less blow by, and will require less time on the dyno prior to installing in your hot rod or race car. The new TB Zinc-Plus is also safe for use in any racing situation to increase your extreme pressure additives in any conventional or synthetic motor oil. Remember: Lucas Engine Break-In Oil Additive TB Zinc-Plus protects camshaft lifters and valve train during break-in period of motors. It is excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear. It contains an exclusive blend of extreme pressure additives and is designed for race lications