Functional Fluid, Lubricant, Grease (including Additives)

Helps stop squeals while preventing corrosion, oxidation and wear. Meets GM, Ford & Chrysler specifications.

Parts Master Dexron III®/Mercon® ATF (Automatic Transmission Fluid) is formulated with advanced additive technology and premium quality basestocks to protect automatic transmissions against undesirable deposits, oxidation and viscosity and thermal breakdown under severe service conditions.

High temperature piston deposit control, soot dispersancy control oil-thickening control; Oxidation inhibition, low-temperature sludge protection and foam protection; Corrosion and rust inhibition; Valve train wear protection and TBN retention; Formulated to provide optimum performance in modern low-emission diesel engines operating under a variety of service conditions including engines with cooled exhaust gas recirculation (EGR);

• High temperature piston deposit control, soot dispersancy control oil-thickening control
• Oxidation inhibition, low-temperature sludge protection and foam protection
• Corrosion and rust inhibition
• Valve train wear protection and TBN retention

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Lucas SAE 85W-140 Plus Gear Oil is a technical blend of oils and additives designed to give longer oil life and longer component life with less power draw. It is formulated with special anti-wear agents and anti- seize agents not found in common gear oils. Lucas SAE 85W-140 Plus Gear Oil contains special lubricity agents for less wear, less heat, less power usage and longer bearing life. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Lucas SAE 85W-140 Plus Gear Oil is ideal for older gear boxes. This formula slows or stops all oil leaks and cushions gears to reduce lash in worn gear sets. It is formulated with special ?climbing additives.? This action is especially important in power dividers and hypoid gears. Lucas SAE 85W-140 Plus Gear Oil resists breakdown from contact with water. It will blend with other gear oils, even synthetics. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

A combination of additives to clean and maintain the fuel system of port injected and carbureted gasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular use keeps the fuel system in perfect working order.

Maintains and regenerates rubber and plastic seals in the engine oil circuit of gas and diesel engines. Oil consumption due to aged and hardened valve stem seals is reduced. No more blue exhaust smoke, improved emissions. External leaks are minimized or even eliminated. Dampens engine noise and reduces repair costs. Reduces pollution and improves the environment.

Fully synthetic motor oil designed for extreme conditions. Developed specifically for high output, high performance engines. The wide viscosity range and unique formulation provides outstanding thermal stability for proper lubrication and low engine wear in tough conditions.

Low SAPS fully synthetic motor oil for diesel engines. Specifically developed for engines equipped with diesel particulate filters (DPF). Use with extended oil change intervals as per manufacturer.

Low-friction, fully synthetic motor oil for all-season use in gasoline and diesel engines without particulate filters (GPF/DPF). Benefits: - saves fuel- instant lubrication after cold start- maximum engine performance- keeps engine clean

Mineral based all-season motor oil, ideal for high mileage diesel vehicles without diesel particulate filters (DPF). Allows for a stable lubricating film even under extreme operating conditions. Designed with proven wear protection technology. Keeps rubber seals such as valve stem seals, crank seals, cam seals etc. soft and pliable for low oil consumption.

Semi-synthetic LIQUI MOLY specialty oil with an additive package containing Molybdenum Disulfide (MoS2). The unique formulation adds a high pressure and temperature resistant lubricating layer to all friction surfaces for added wear protection and safety reserves. Reduced friction will contribute to lower oil temperatures, oil consumption and stable oil pressure. Particularly suited for older generation air- or water-cooled gasoline solid lifter engines, with or without turbochargers. The MoS2 formulation dictates the oils gray color.

Modern, fully synthetic top-of-the-line motor oil. Provides quick oil delivery throughout the engine during cold-start and optimum lubrication with maximum protection under all operating conditions. Beneficial for increased engine life in high tech engines. Use with extended oil change intervals as per manufacturer.

Fully synthetic low viscosity premium class motor oil, developed to meet the high demands of modern Asian and American gasoline engines. The innovative additive technology guarantees best wear protection and engine cleanliness, lowest oil and fuel consumption and highest engine efficiency. Ideally suited for engines with direct injection (GDI) and turbochargers. Use with extended oil change intervals as per manufacturer.

Modern, fully synthetic all-season motor oil for superior performance and long engine life. For gasoline and diesel vehicles without particulate filters (GPF/DPF). Exceeds strict test requirements demanded by major manufacturers. Use with extended oil change intervals as per manufacturer.

Top class fully synthetic, all-season motor oil for superior performance and long engine life. For gasoline and diesel vehicles without particulate filters (GPF/DPF).Exceeds strict test requirements specified by major manufacturers.Safe with catalytic converters and turbochargers. Use with extended oil change intervals as per manufacturer.

High-tech anti-wear additive, suitable for most 4-stroke engines as well as manual transmissions and compressors.Reduces friction and wear thanks to a unique combination of ceramic compounds and chemical anti-wear agents. It will prevent direct metal-to-metal contact and reduce friction to increase engine life and reduce fuel consumption in gasoline and diesel engines.

Prevents and reduces hydraulic lifter noise. Cleans oil passages to remove oil flow restrictions. Restores proper hydraulic lifter function and reduces wear. damps hydraulic tappet noise cleans valve bores improves the lubrication properties of the oil

Fully synthetic low viscosity premium class motor oil, developed to meet the high demands of modern Asian and American gasoline engines. The innovative additive technology guarantees best wear protection and engine cleanliness, lowest oil and fuel consumption and highest engine efficiency. Ideally suited for engines with direct injection (GDI) and turbochargers. Use with extended oil change intervals as per manufacturer.

Fully synthetic superior, low friction motor oil. Developed specifically for use in various late model Volvo vehicles and also suitable for use in several other manufacturers vehicles. The low viscosity ensures excellent cold start behavior, improves engine efficiency and reduces fuel consumption. Use with extended oil change intervals as per manufacturer.

Fully synthetic superior low friction motor oil. Specifically developed for the high requirements of select Volkswagen and Audi vehicles. The low viscosity ensures excellent cold start behavior, improves engine efficiency and reduces fuel consumption. The innovative additive technology ensures excellent protection against wear, superb engine cleanness and greater oxidation stability. Use with extended oil change intervals as per manufacturer.

Fully synthetic LIQUI MOLY specialty with a unique additive technology. The powerful MFC (Molecular Friction Control) technology prevents formation of deposits while simultaneously reducing frictional losses. The synergetic effect provides optimum wear protection even under tough operating conditions. Improved fuel consumption and increased engine life are some of the end results. The oils fluorescent green color is typical for the MFC formulation.

Fully synthetic top-of-the-line, low friction motor oil. Developed specifically for use in numerous Jaguar and Land Rover vehicles. Low viscosity ensures excellent cold start behavior, improves engine efficiency and reduces fuel consumption. Use with extended oil change intervals as per manufacturer.