Functional Fluid, Lubricant, Grease (including Additives)

ATP Transmission Components are exact fit, no compromise replacement parts

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

ATP Transmission Components are exact fit, no compromise replacement parts

Help your engine run smoother and last longer! Sea Foam works in fuel and oil systems to clean and lubricate critical engine areas. Made from petroleum ingredients, Sea Foam is safe and effective when used in any gasoline or diesel engine.   Just pour it in!

Valvoline 2-Stroke Outboard Marine Oil is a superior quality two-stroke lubricant specifically designed for water-cooled, high-revving engines with pre-mix or injection systems. Premium base stocks are blended with a modern ashless detergent additive package to provide fortification for maximum performance in outboard engines.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

Pentosin CHF 202 Hydraulic Fluid formulated for power steering, rear axle steering, level control, hydro-pneumatic suspension and shock absorbers. Never mix with ATF fluids. CHF 202 and CHF 11S are fully compatible. Pentosin CHF 202 is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 202 is especially designed for hydraulics in the automotive industry with the highest technical requirements such as: power steering, clutch hydraulic, electro-hydraulic mechanisms of convertible tops, etc. It is suitable for all extreme ambient temperatures and guarantees full performance from -40C to 130C sys em temperature. Ideal for cold weather climates. Operating temperature range from -40C to 130C. Works perfectly under extreme temperature changes. Used by more then 25 global vehicle manufactures as OE first-fill.

Lucas TB Zinc-Plus Engine Break-In Oil Additive is designed for all who fear the initial break-in period of any new motor, especially if they are running a flat tappet camshaft. After reviewing our customer service requests, we found that many of our customers had requested an additive package that would protect the new or rebuilt hot rod or race motor they have built. The new Lucas Oil TB Zinc-Plus has an additive package that will help seat in the new rings while providing an excellent extreme pressure additive package that will help protect the entire valve train, and of course, the camshaft. We have found through dyno testing that the engines do, in fact, break-in much faster with less blow by, and will require less time on the dyno prior to installing in your hot rod or race car. The new TB Zinc-Plus is also safe for use in any racing situation to increase your extreme pressure additives in any conventional or synthetic motor oil. Remember: Lucas Engine Break-In Oil Additive TB Zinc-Plus protects camshaft lifters and valve train during break-in period of motors. It is excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear. It contains an exclusive blend of extreme pressure additives and is designed for race lications

Lucas Power Steering Fluid with Conditioners is formulated with the highest quality synthetic base oils and additives to help prevent power steering unit leaks, provide smooth operation and eliminate squealing. Our unique chemistry prolongs fluid life, improves fluid shear stability and improves fluid oxidation to minimize sludge and varnish formation. It reduces parts wear and extends equipment life. It cleans and smoothes internal springs and valves to help eliminate sticking and conditions seals to minimize or stop small leaks. Lucas Power Steering Fluid with Conditioners also reduces sluggish operation and noise and chatter. It contains an effective foam inhibitor and maintains cold temperature properties for power steering fluid. Designed for use in both new and older vehicles. Can be used in Honda Systems.

Provides corrosion protection for entire air brake system and disperses water.

OE Engineered and Formulated Vehicle Specific Automatic Transmission Fluid; Preferred by Factory and Professional Technicians

HIGH MILEAGE is specially formulated to help keep higher mileage gasoline cars and trucks on the road longer. High Mileage works in fuel to clean fuel passageways and lubricate upper engine areas. When added to oil, High Mileage cleans away harmful oil residues that can restrict flow. Just pour it in!

Mobil 1 ESP X2 full synthetic motor oil 0W-20 is designed to provide outstanding engine cleanliness, wear protection, and advanced fuel economy* to keep your engine running like new. This proprietary motor oil has been engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline-powered European vehicles that require SAE 0W-20 viscosity grades. Mobil 1 ESP has active cleaning agents that help to reduce deposits and sludge buildup for a cleaner engine. This technologically advanced formula helps to reduce oil aging with excellent oxidation stability for extended oil drain interval protection and offers low-temperature protection for quick cold-weather starting and ultra-fast protection. Mobil 1 ESP X2 0W-20 combines durability and protection with a low viscosity, low friction motor oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1 is Americas leading synthetic motor oil brand at retail*, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. To learn about the Mobil 1 Limited Warranty, visit Mobil.US. (*Compared to Mobil 1 ESP Formula 5W-30. **Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending February 27, 2021)

RU-GLYDE Tire Mounting Lube Lubrication is an essential part of tire mounting and dismounting service. Always lubricate with the industry-approved RU-GLYDE to protect against bead damage and to help seat tire beads properly on the rim. Will not cause rust or tires to slip after mounting and balancing. Removes rubber squeals in bushing and grommets. Restores new look to floor mats, tires, and upholstery.

Cleans engines in 5 minutes. Frees up sludge associated with slow city driving. IMPORTANT. MotorMedic Motor Flush is not recommended for Turbo Charged engines, when the Turbo Charger is lubricated by the engine oil. For those applications use MOTORMEDIC Synthetic Motor Flush for Turbo Charged Gas and Diesel Engines (MFD1).

Pentosin CHF 11S Hydraulic Fluid formulated for power steering, rear axle steering, level control, hydro-pneumatic suspension and shock absorbers. Never mix with ATF fluids. CHF 11S and CHF 202 are fully compatible. Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extr me conditions and guarantees full performance from -40C to over 130C system temperature. Ideal for cold weather climates. Operating temperature range from -40C to 130C. Works perfectly under extreme temperature changes. Used by more then 25 global vehicle manufactures as OE first-fill.