Functional Fluid, Lubricant, Grease (including Additives)

Lubrication is usually done with only a thin film of lubricant and 5th Wheels are no exception. No matter how much grease you pile on a 5th wheel, only a thin film remains after the weight of a trailer settles on it. So why not put on a thin film to start. Lucas 5th Wheel & Slider Lube is a clean, inexpensive alternative to grease. It has a film strength many times stronger than grease. It is slicker than grease, and it?s waterproof. Since it is not a grease, it will not leave gooey soap behind after the lubricant is exhausted. This performance feature will help minimize maintenance issues in the lock mechanisms associated with the crusty, cruddy soap remaining in the system. Snip the tip on the 16 oz. bottle and string over the dry spot on the 5th Wheel. On slider rails, squeeze the bottle as you drag the tip down the slider rail. One thin string is all that is necessary. Move the trailer back and forth on the slider rail to spread the lube. This should provide months of easy sliding. Remember... dry 5th wheels are a major cause of front tire wear, front end wear, spring bushing wear and jack-knifing.

Valvoline All-Terrain was specially formulated for heavy duty diesel engines operating in extreme duty cycles or severe environmental contamination conditions such as experienced in mining, construction and agriculture.

Marvel Mystery Oil

K-Seal HD (heavy duty) for large capacity cooling systems such as trucks/tractors, industrial, AG, and RV engines.
K-Seal HD is the best-selling trade trusted permanent total coolant leak repair. The super concentrated formula not only permanently repairs blown head gaskets it also seals leaks in the radiator, heater core, head, block, water pump and freeze plugs. K-Seal HD mixes with all antifreeze / coolant so there is no need to drain or flush the system before or after treatment, and just one bottle is all you need for engines up to 60 quarts. Simple to use simply Shake, Pour and Go! K-Seal HD can be added via the radiator, top hose or via the expansion tank provided it is safe to do so.
K-Seal HD uses a unique ceramic formula and contains NO sodium silicate or liquid glass so it will positively not clog any part of the cooling system. K-Seal HD also works on Hard Plastic and has been independently tested at Brighton University and conforms to the American Standard ASTM D-3147 for Stop-Leak Additives for Engine Coolants. Guarantee - Once we make the repair it is for the life of the engine.

---

• Heavy Duty Application - Truck/Tractor, Industrial, AG, RV and Large Capacity Engines
• Positively Will NOT Clog any Part of the Cooling System
• No Draining / No Flushing
• Unique Ceramic Formula with NO Sodium Silicate or Liquid Glass
• Independently Tested to Meet ASTM D3147
• Pre Packed in Attractive 6 Pack Counter Display
• Permanently Seals Holes and Cracks up to 1/32" in - Head Gaskets, Cracked Blocks, Leaking Radiators, Leaking Heater Cores, Leaking Freeze Plugs and Leaking Water Pump Casings.
• Easy to Use - Just Shake Pour & Go!
• Can be Added to the Overflow Tank
• Can be Added to a Hot or Cold Engine (provided safe to open)

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

Help your engine run smoother and last longer! Sea Foam works in fuel and oil systems to clean and lubricate critical engine areas. Made from petroleum ingredients, Sea Foam is safe and effective when used in any gasoline or diesel engine.   Just pour it in!

Valvoline 2-Stroke Outboard Marine Oil is a superior quality two-stroke lubricant specifically designed for water-cooled, high-revving engines with pre-mix or injection systems. Premium base stocks are blended with a modern ashless detergent additive package to provide fortification for maximum performance in outboard engines.

Use in Autos, Buses, Trucks, Tractors, Outboard Motors, Chain Saws & Construction Equipment. Easier starts for gasoline and diesel engines. Effective at -65?F. Contains upper cylinder lubricant. This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road engines.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

Lucas TB Zinc-Plus Engine Break-In Oil Additive is designed for all who fear the initial break-in period of any new motor, especially if they are running a flat tappet camshaft. After reviewing our customer service requests, we found that many of our customers had requested an additive package that would protect the new or rebuilt hot rod or race motor they have built. The new Lucas Oil TB Zinc-Plus has an additive package that will help seat in the new rings while providing an excellent extreme pressure additive package that will help protect the entire valve train, and of course, the camshaft. We have found through dyno testing that the engines do, in fact, break-in much faster with less blow by, and will require less time on the dyno prior to installing in your hot rod or race car. The new TB Zinc-Plus is also safe for use in any racing situation to increase your extreme pressure additives in any conventional or synthetic motor oil. Remember: Lucas Engine Break-In Oil Additive TB Zinc-Plus protects camshaft lifters and valve train during break-in period of motors. It is excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear. It contains an exclusive blend of extreme pressure additives and is designed for race lications

Lucas Power Steering Fluid with Conditioners is formulated with the highest quality synthetic base oils and additives to help prevent power steering unit leaks, provide smooth operation and eliminate squealing. Our unique chemistry prolongs fluid life, improves fluid shear stability and improves fluid oxidation to minimize sludge and varnish formation. It reduces parts wear and extends equipment life. It cleans and smoothes internal springs and valves to help eliminate sticking and conditions seals to minimize or stop small leaks. Lucas Power Steering Fluid with Conditioners also reduces sluggish operation and noise and chatter. It contains an effective foam inhibitor and maintains cold temperature properties for power steering fluid. Designed for use in both new and older vehicles. Can be used in Honda Systems.