Functional Fluid, Lubricant, Grease (including Additives)

Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended for any hi-load transmission or differential in race and track vehicles or whenever added protection is needed.

Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals.

NULL

Permanent pour 'n go head gasket & block repair compatible with all types of antifreeze. Repairs cooling system leaks w/3 unique technologies: military-strength fibers nanotechnology & Cool-X Conditioner-the ultimate solution for all coolant leaks.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

K-Seal HD (heavy duty) for large capacity cooling systems such as trucks/tractors, industrial, AG, and RV engines.
K-Seal HD is the best-selling trade trusted permanent total coolant leak repair. The super concentrated formula not only permanently repairs blown head gaskets it also seals leaks in the radiator, heater core, head, block, water pump and freeze plugs. K-Seal HD mixes with all antifreeze / coolant so there is no need to drain or flush the system before or after treatment, and just one bottle is all you need for engines up to 60 quarts. Simple to use simply Shake, Pour and Go! K-Seal HD can be added via the radiator, top hose or via the expansion tank provided it is safe to do so.
K-Seal HD uses a unique ceramic formula and contains NO sodium silicate or liquid glass so it will positively not clog any part of the cooling system. K-Seal HD also works on Hard Plastic and has been independently tested at Brighton University and conforms to the American Standard ASTM D-3147 for Stop-Leak Additives for Engine Coolants. Guarantee - Once we make the repair it is for the life of the engine.

---

• Heavy Duty Application - Truck/Tractor, Industrial, AG, RV and Large Capacity Engines
• Positively Will NOT Clog any Part of the Cooling System
• No Draining / No Flushing
• Unique Ceramic Formula with NO Sodium Silicate or Liquid Glass
• Independently Tested to Meet ASTM D3147
• Pre Packed in Attractive 6 Pack Counter Display
• Permanently Seals Holes and Cracks up to 1/32" in - Head Gaskets, Cracked Blocks, Leaking Radiators, Leaking Heater Cores, Leaking Freeze Plugs and Leaking Water Pump Casings.
• Easy to Use - Just Shake Pour & Go!
• Can be Added to the Overflow Tank
• Can be Added to a Hot or Cold Engine (provided safe to open)

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.