Functional Fluid, Lubricant, Grease (including Additives)

A combination of active agents, specifically developed to clean the intake valves and the combustion chamber of port injected engines. Protects against corrosion in the fuel system.

A combination of additives to clean and maintain the fuel system of port injected and carbureted gasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular use keeps the fuel system in perfect working order.

An effective mixture of additives used to clean and maintain fuel systems of injected or carbureted gasoline engines.Cleans injectors and the combustion chamber, restores proper fuel atomization and improves engine efficiency. Suitable for use as problem solver and for preventive maintenance.

Removes deposits in cooling systems of all water cooled engines. It removes scale, grease, sludge and other deposits to allow restored performance and proper cooling performance.

High-tech fuel additive, developed specifically for improved throttle response under partial engine load. Optimizes fuel atomization and combustion, cleans fuel system while providing maximum engine performance and efficiency.

Lucas Extreme Cold Weather Fuel Treatment is a concentrate of our regular fuel treatment with upper cylinder lubricants PLUS a concentration of new Lucas anti-gel agents. This combination sets it apart from all the other fuel treatments on the market. One quart treats 100 gallons of ultra-low sulfur fuel, low sulfur fuel and bio-diesel to -25?F, -40?F and -15?F respectively. Contains special clean burning additives to facilitate a complete combustion burn for more power, better fuel economy and lower emissions. Provides essential lubricity to internal engine components. To add more power, mpg and longer engine life in warm weather conditions, use our regular Lucas Fuel Treatment. This product should more than pay for itself in increased fuel mileage alone.

Idemitsu CVTF Type SB2 is specifically formulated to meet and/or exceed the latest performance and protection requirements of continuously variable transmissions in Subaru vehicles. Idemitsu CVTF Type SB2 is recommended for use where CVTF II is specified. This advanced additive technology formulation provides superior performance in Lineartronic chain and pulley transmissions. Idemitsu CVTF Type SB2 is precisely engineered to ensure: a) Outstanding anti-shudder performance and smooth shifting, b) Excellent resistance to oxidation and thermal breakdown, providing longer fluid life, c) Optimal fuel efficiency by maximizing torque and horsepower, d) Superior cleanliness against sludge and varnish ensuring the transmission stays clean and functions effectively, e) Excellent seal compatibility and conditioning to reduce risk of fluid leaks from seal shrinkage, hardening and/or cracking

Diesel Fuel Supplement +Cetane Boost is a winterizer/antigel that is used in the cold winter months to prevent fuel gelling and keep fuel-filters from plugging with ice and wax. When temperatures drop, paraffin (wax) in ULSD fuel will gel stopping fuel from flowing through the engine, and water in the fuel can freeze on the facings of fuel-filters, blocking fuel flow. It provides trouble-free winter operation for diesel fuel. Diesel Fuel Supplement +Cetane Boost is intended for use only during cold winter months when temperatures drop below +30F. Use Diesel Kleen +Cetane Boost (in the silver bottle) for peak performance in non-winter months. If your vehicle will not start or gain power in cold temperatures, use Diesel 911 (in the red bottle).

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

1) Maximum Fuel Economy CVTF Type TLS-FE delivers sufficient hydraulic pressure on the belt for accurately shifting diameter in the driver pulley and driven pulley for achieving all-out torque transfer, thereby contributing to maximum fuel economy, 2) Friction Reduction and Torque Transfer CVTF Type TLS-FE maintains optimum distance between the belt and the pulley in meeting the required friction reduction performance to provide seamless torque transfer from the engine to the wheels, 3) Optimum Engine Speed CVTF Type TLS-FE provides superior performance in achieving optimum gear ratio in the CVT to ensure that the most appropriate amount of energy from fuel combustion is used

1) Friction Reduction The size of the oil pump of JATCO CVT 7 and JATCO CVT 8 have been made smaller thanks to the reduction of oil leakage. This, together with the use of a newly developed low-viscosity oil, reduced CVT friction by up to 40 percent and upgraded fuel economy, 2) Seamless Torque Transfer CVTF Type N3 maintains exact lubricant thickness in the belt and gear system in JATCO CVT 7 and maintains precise distance between the steel belt and the pulley in JATCO CVT 8, meeting the required friction reduction performance for continuously adjusting gear ratio to provide seamless torque transfer from the engine to the wheels and enables optimum torque to be maintained for any given power demand, 3) Wide Lockup Range CVTF Type N3 provides superior response and stability for a wide lockup range for quick CVT shift ratios, which enables nearly instantaneous response and a feeling of naturally powerful acceleration, 4) Improved Hydraulic Pressure CVTF Type N3 delivers sufficient hydraulic pressure on the belt to maintain required lateral pressure for shifting diameter in the driver pulley and driven pulley for achieving reliable torque transfer, thereby contributing to improved fuel economy

Total injector cleaner and performance improver. Endorsed by Cummins. Cleans dirty injectors and prevents injector sticking. Removes both internal and external deposits on fuel injectors. Boosts power. Restores lost power and fuel economy. Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear. Effective in all diesel fuels. Treats up to 100 gallons.

1) Precisely engineered frictional characteristics guarantee outstanding anti-shudder performance in CVTs equipped with torque converter, 2) Exact frictional properties provide superior performance in demanding, high-torque applications, 3) Provides superior deposit control and protects metal surfaces from rust and corrosion, 4) Advanced anti-wear technology provides maximum protection to belts and pulleys, 5) Precisely engineered formulation provides excellent viscosity control (minimal viscosity loss due to shearing, outstanding low-temperature fluidity, enhanced lubricant film strength at high temperatures)

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Permatex Red High Strength Threadlocker is OEM specified. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.