Functional Fluid, Lubricant, Grease (including Additives)

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.

Fuel Stabilizer is for gasoline engines that keeps stored fuel fresh. For storage and everyday use in all two and four cycle engines.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Permanent pour 'n go head gasket & block repair compatible with all types of antifreeze. Repairs cooling system leaks w/3 unique technologies: military-strength fibers nanotechnology & Cool-X Conditioner-the ultimate solution for all coolant leaks.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

Disc Brake Quiet forms a water resistant, high-temperature film that absorbs noise while quieting squeaks & squeals. Specially formulated to dampen the vibrations that cause brake noise. For use on the back of non-shimmed disc pads.

K-Seal HD (heavy duty) for large capacity cooling systems such as trucks/tractors, industrial, AG, and RV engines.
K-Seal HD is the best-selling trade trusted permanent total coolant leak repair. The super concentrated formula not only permanently repairs blown head gaskets it also seals leaks in the radiator, heater core, head, block, water pump and freeze plugs. K-Seal HD mixes with all antifreeze / coolant so there is no need to drain or flush the system before or after treatment, and just one bottle is all you need for engines up to 60 quarts. Simple to use simply Shake, Pour and Go! K-Seal HD can be added via the radiator, top hose or via the expansion tank provided it is safe to do so.
K-Seal HD uses a unique ceramic formula and contains NO sodium silicate or liquid glass so it will positively not clog any part of the cooling system. K-Seal HD also works on Hard Plastic and has been independently tested at Brighton University and conforms to the American Standard ASTM D-3147 for Stop-Leak Additives for Engine Coolants. Guarantee - Once we make the repair it is for the life of the engine.

---

• Heavy Duty Application - Truck/Tractor, Industrial, AG, RV and Large Capacity Engines
• Positively Will NOT Clog any Part of the Cooling System
• No Draining / No Flushing
• Unique Ceramic Formula with NO Sodium Silicate or Liquid Glass
• Independently Tested to Meet ASTM D3147
• Pre Packed in Attractive 6 Pack Counter Display
• Permanently Seals Holes and Cracks up to 1/32" in - Head Gaskets, Cracked Blocks, Leaking Radiators, Leaking Heater Cores, Leaking Freeze Plugs and Leaking Water Pump Casings.
• Easy to Use - Just Shake Pour & Go!
• Can be Added to the Overflow Tank
• Can be Added to a Hot or Cold Engine (provided safe to open)

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

OEM Extended Life - EURO I Concentrate Antifreeze/Coolant is specifically engineered for use in BMW, Jaguar, Mercedes-Benz, Mini, Smart, Volvo and other newer European model gasoline and light duty diesel powered vehicles requiring a nitrite, amine and phosphate (NAP) free, OAT engine coolant; The color-coded packaging for the recommended vehicles, make it easier for you to find the right match for your vehicle; This ethylene glycol based product uses low silicate Organic Acid Technology (OAT) to provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals, including aluminum; When properly diluted and added as an initial fill and maintained in accordance with engine manufacturer's maintenance recommendation, OEM EURO I provides up to 150,000 miles or 5 years service life protection in automotive applications; Meets or exceeds performance requirements ASTM D3306, D6210-10 and D7583; BS6580 and is recommended for use and fully compatible with product meeting VW TL774G+; For best results, do not mix with conventional high pH, phosphate, borate or silicate based coolants; OEM takes the guesswork out of finding the right antifreeze/coolant with the online EasyMatch tool that guarantees to find the right color-coded match in three simple steps. Trust the experts at OEM. The right match for the right vehicle. Yours.

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

Provides corrosion protection for entire air brake system and disperses water.

Provides corrosion protection for entire air brake system and disperses water.