Functional Fluid, Lubricant, Grease (including Additives)

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

ATP Transmission Components are exact fit, no compromise replacement parts

NULL

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

ATP Transmission Components are exact fit, no compromise replacement parts

LUBEGARD(R) Synthetic Automatic Transmission Fluid Protectant is a concentrated additive package infused with superior seal conditioners and friction modifiers. This unique product restores additive content to used ATF and enhances new ATF resulting in improved performance and smoother, more consistent shifting. It can safely be added to any automatic transmission fluid (ATF) including full synthetic, semi synthetic, conventional, and low viscosity fluids except Ford Type F or CVT. LUBEGARD(R) Synthetic Automatic Transmission Fluid Protectant is engineered to raise the thermal and oxidative stability level of automatic transmission fluids, so when it operates at elevated temperatures, it does not thin out and pyrolize, burn, or react with oxygen and form deposits. It is formulated with proprietary Liquid Wax Esters (LXE(R)) that are unique because of their natural lubricity, high viscosity index, and high flash and fire points.

ATP Transmission Components are exact fit, no compromise replacement parts

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

Lucas Transmission Fix contains no solvents or anything else that would be harmful to an automatic transmission. It is a thermal stable blend of petroleum-extracted additives designed to correct existing problems and prevent new ones in automatic transmissions. Lucas Transmission Fix stops slip, hesitation and rough shifting in worn transmissions. It completely eliminates most seal leaks and lowers operating temperatures in hard working units. A must for motor homes and commercial vehicles. Lucas Transmission Fix is excellent for preventative maintenance and will extend fluid life up to four times longer. It also extends needed protection to planetary gears. One 24 oz. bottle of Lucas Transmission Fix can be added to existing fluid without draining. A second bottle may be necessary in large or badly worn transmissions. In smaller transmissions (compact or sub-compact vehicles), use 12 oz. Lucas Transmission Fix is also excellent for light duty manual transmissions using automatic transmission fluid or motor oil as a lubricant. For easier shifting and extended transmission life drain transmission, install one 24-ounce bottle of Lucas Transmission Fix and top off with A.T.F. or motor oil.

LUBEGARD(R) Instant Shudder FixxTM is a concentrated friction modifier formulated specifically for eliminating torque converter shudder problems in automatic transmissions. It is the #1 shudder fix used by professionals.

Provides corrosion protection for entire air brake system and disperses water.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

Provides corrosion protection for entire air brake system and disperses water.

Complete kit contains everything required for making professional-quality permanent repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 10 minutes and cure in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs cracks up to 4" in length and holes up to 3/8 " in diameter. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. Fast curing product with gelling of mixed adhesive in 5 6 minutes and fixturing in 9 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125". Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.