Functional Fluid, Lubricant, Grease (including Additives)

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Stops Electrical Failures. A inMUSTin for all electronic and standard ignitions. Meets OEM specifications. Only Dielectric Silicone works on HIGH ENERGY IGNITION SYSTEMS. Prevents mis-readings. Seals out moisture and corrosion. Suggested Applications: Sensor connections, computer connections, solenoids, truck pigtails, plugs, ignition modules and coils, marine connections, lighting systems, batteries, and terminals.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

NULL

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

Disc Brake Quiet forms a water resistant, high-temperature film that absorbs noise while quieting squeaks & squeals. Specially formulated to dampen the vibrations that cause brake noise. For use on the back of non-shimmed disc pads.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.