Functional Fluid, Lubricant, Grease (including Additives)

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Removes deposits in cooling systems of all water cooled engines. It removes scale, grease, sludge and other deposits to allow restored performance and proper cooling performance.

Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.