Functional Fluid, Lubricant, Grease (including Additives)

Helps stop squeals while preventing corrosion, oxidation and wear. Meets GM, Ford & Chrysler specifications.

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

Global Synthetic Power Steering Fluid is specially formulated to meet the specifications of European OEM?s requiring high technology fluids that enable extended change intervals. This premium synthetic power steering fluid exceeds requirements and is suitable for use in all other vehicles. Honda fluid is recommended for Honda and Acura vehicles.Penray Global Synthetic Power Steering Fluid Provides exceptional viscosity stability over a wide temperature range, with improved flow at low temperatures. Excellent anti-wear properties ensure suitability for use as hydraulic fluid in suspension systems, traction control units and as shock absorber fluid.Meets or exceeds performance standards and service requirements of European OEM?s such as: Audi, Mercedes Benz and Volvo.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

Power Steering Fluid for Honda and Acura helps stop leaks, revatalize old seals and prevent wear, foam and oxidation.

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

Universal Power Steering Fluid with Stop Leak helps stop leaks, revatalize old seals and prevent wear, foam and oxidation.

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

Permatex Red High Strength Threadlocker is OEM specified. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.