Functional Fluid, Lubricant, Grease (including Additives)

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

Stops Electrical Failures. A inMUSTin for all electronic and standard ignitions. Meets OEM specifications. Only Dielectric Silicone works on HIGH ENERGY IGNITION SYSTEMS. Prevents mis-readings. Seals out moisture and corrosion. Suggested Applications: Sensor connections, computer connections, solenoids, truck pigtails, plugs, ignition modules and coils, marine connections, lighting systems, batteries, and terminals.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

8 oz High Viscosity-150; Meets or exceeds OEM specifications; Provides superior protection against compressor wear; Contains ICE32 premium lubricant enhancer for ultimate performance & friction reduction

8 oz Low Viscosity-46; Meets or exceeds OEM specifications; Provides superior protection against compressor wear; Contains ICE32 premium lubricant enhancer for ultimate performance & friction reduction

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. Required for modern high energy ignition systems.