Functional Fluid, Lubricant, Grease (including Additives)

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Ultra Slick adheres to component surfaces to prevent scuffing and galling during initial start-up. This high quality formulation meets or exceeds OEM performance specs for engine assembly lubricants.