Functional Fluid, Lubricant, Grease (including Additives)

Fuel Stabilizer is for gasoline engines that keeps stored fuel fresh. For storage and everyday use in all two and four cycle engines.

Idemitsu CVTF Type SB2 is specifically formulated to meet and/or exceed the latest performance and protection requirements of continuously variable transmissions in Subaru vehicles. Idemitsu CVTF Type SB2 is recommended for use where CVTF II is specified. This advanced additive technology formulation provides superior performance in Lineartronic chain and pulley transmissions. Idemitsu CVTF Type SB2 is precisely engineered to ensure: a) Outstanding anti-shudder performance and smooth shifting, b) Excellent resistance to oxidation and thermal breakdown, providing longer fluid life, c) Optimal fuel efficiency by maximizing torque and horsepower, d) Superior cleanliness against sludge and varnish ensuring the transmission stays clean and functions effectively, e) Excellent seal compatibility and conditioning to reduce risk of fluid leaks from seal shrinkage, hardening and/or cracking

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

Permanent pour 'n go head gasket & block repair compatible with all types of antifreeze. Repairs cooling system leaks w/3 unique technologies: military-strength fibers nanotechnology & Cool-X Conditioner-the ultimate solution for all coolant leaks.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

1) Maximum Fuel Economy CVTF Type TLS-FE delivers sufficient hydraulic pressure on the belt for accurately shifting diameter in the driver pulley and driven pulley for achieving all-out torque transfer, thereby contributing to maximum fuel economy, 2) Friction Reduction and Torque Transfer CVTF Type TLS-FE maintains optimum distance between the belt and the pulley in meeting the required friction reduction performance to provide seamless torque transfer from the engine to the wheels, 3) Optimum Engine Speed CVTF Type TLS-FE provides superior performance in achieving optimum gear ratio in the CVT to ensure that the most appropriate amount of energy from fuel combustion is used

1) Friction Reduction The size of the oil pump of JATCO CVT 7 and JATCO CVT 8 have been made smaller thanks to the reduction of oil leakage. This, together with the use of a newly developed low-viscosity oil, reduced CVT friction by up to 40 percent and upgraded fuel economy, 2) Seamless Torque Transfer CVTF Type N3 maintains exact lubricant thickness in the belt and gear system in JATCO CVT 7 and maintains precise distance between the steel belt and the pulley in JATCO CVT 8, meeting the required friction reduction performance for continuously adjusting gear ratio to provide seamless torque transfer from the engine to the wheels and enables optimum torque to be maintained for any given power demand, 3) Wide Lockup Range CVTF Type N3 provides superior response and stability for a wide lockup range for quick CVT shift ratios, which enables nearly instantaneous response and a feeling of naturally powerful acceleration, 4) Improved Hydraulic Pressure CVTF Type N3 delivers sufficient hydraulic pressure on the belt to maintain required lateral pressure for shifting diameter in the driver pulley and driven pulley for achieving reliable torque transfer, thereby contributing to improved fuel economy

1) Precisely engineered frictional characteristics guarantee outstanding anti-shudder performance in CVTs equipped with torque converter, 2) Exact frictional properties provide superior performance in demanding, high-torque applications, 3) Provides superior deposit control and protects metal surfaces from rust and corrosion, 4) Advanced anti-wear technology provides maximum protection to belts and pulleys, 5) Precisely engineered formulation provides excellent viscosity control (minimal viscosity loss due to shearing, outstanding low-temperature fluidity, enhanced lubricant film strength at high temperatures)

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

K-Seal HD (heavy duty) for large capacity cooling systems such as trucks/tractors, industrial, AG, and RV engines.
K-Seal HD is the best-selling trade trusted permanent total coolant leak repair. The super concentrated formula not only permanently repairs blown head gaskets it also seals leaks in the radiator, heater core, head, block, water pump and freeze plugs. K-Seal HD mixes with all antifreeze / coolant so there is no need to drain or flush the system before or after treatment, and just one bottle is all you need for engines up to 60 quarts. Simple to use simply Shake, Pour and Go! K-Seal HD can be added via the radiator, top hose or via the expansion tank provided it is safe to do so.
K-Seal HD uses a unique ceramic formula and contains NO sodium silicate or liquid glass so it will positively not clog any part of the cooling system. K-Seal HD also works on Hard Plastic and has been independently tested at Brighton University and conforms to the American Standard ASTM D-3147 for Stop-Leak Additives for Engine Coolants. Guarantee - Once we make the repair it is for the life of the engine.

---

• Heavy Duty Application - Truck/Tractor, Industrial, AG, RV and Large Capacity Engines
• Positively Will NOT Clog any Part of the Cooling System
• No Draining / No Flushing
• Unique Ceramic Formula with NO Sodium Silicate or Liquid Glass
• Independently Tested to Meet ASTM D3147
• Pre Packed in Attractive 6 Pack Counter Display
• Permanently Seals Holes and Cracks up to 1/32" in - Head Gaskets, Cracked Blocks, Leaking Radiators, Leaking Heater Cores, Leaking Freeze Plugs and Leaking Water Pump Casings.
• Easy to Use - Just Shake Pour & Go!
• Can be Added to the Overflow Tank
• Can be Added to a Hot or Cold Engine (provided safe to open)

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

Never Lose the Straw Again using WD-40 Multi-Use Product with SMART STRAW?SPRAYS 2 WAYS technology. It features a permanently attached straw that sprays two ways. Simply flip it up for a precision stream and down for a regular spray action. Discover how one of the world's smartest products just got smarter.