Functional Fluid, Lubricant, Grease (including Additives)

High performance grease for a wide application range in all motor vehicles and for general machine lubrication. Thanks to added MoS2 it offers outstanding protection during extreme loads and high heat and also adds limp-home properties. For heavily loaded bearings and joints, splined shafts, threads and guides. Ideal for constant velocity drive joints. Certification: acc DIN 51502 KPF 2K-30. Operating temperature range: -65 C to +120 C (-86 F to +248 F), up to +130 C (+266 F) briefly.

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Is used for assembly of engines, gearboxes, industrial machinery or for press fitting etc. Very adherent on polished surfaces. Use on engine bearings, piston skirts, camshaft lobes etc. Prevents dry-run damage at start-up. Allows easy assembly of tight-fitting parts. Provides protection from scoring during press fit. Uses a synergistically active and unique solid lubricant system of zinc sulfide, graphite, fluorides and tungsten disulfide. Service temperature: -35 C to+450 C (-31 F to +842 F).

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Lucas White Lithium Grease is formulated with the highest quality base oils and additives to provide mild extreme pressure properties. The white creamy appearance differentiates it from other products. The product is packaged in 8 ounce squeeze tubes for ease of application. Lucas White Lithium Grease is recommended for use in plain and antifriction bearings operating under moderate load conditions. It is recommended for use in automotive chassis, trucks, tractors and contractor equipment. Not recommended for use in wheel bearings. Our product is truly versatile grease with applications in industrial, automotive and household applications including garage door openers, springs, hinges, etc.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. Protects against uneven pad wear.

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

Disc Brake Quiet forms a water resistant, high-temperature film that absorbs noise while quieting squeaks & squeals. Specially formulated to dampen the vibrations that cause brake noise. For use on the back of non-shimmed disc pads.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.