Functional Fluid, Lubricant, Grease (including Additives)

A combination of active agents, specifically developed to clean the intake valves and the combustion chamber of port injected engines. Protects against corrosion in the fuel system.

A combination of additives to clean and maintain the fuel system of port injected and carbureted gasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular use keeps the fuel system in perfect working order.

An effective mixture of additives used to clean and maintain fuel systems of injected or carbureted gasoline engines.Cleans injectors and the combustion chamber, restores proper fuel atomization and improves engine efficiency. Suitable for use as problem solver and for preventive maintenance.

High-tech fuel additive, developed specifically for improved throttle response under partial engine load. Optimizes fuel atomization and combustion, cleans fuel system while providing maximum engine performance and efficiency.

Lucas Extreme Cold Weather Fuel Treatment is a concentrate of our regular fuel treatment with upper cylinder lubricants PLUS a concentration of new Lucas anti-gel agents. This combination sets it apart from all the other fuel treatments on the market. One quart treats 100 gallons of ultra-low sulfur fuel, low sulfur fuel and bio-diesel to -25?F, -40?F and -15?F respectively. Contains special clean burning additives to facilitate a complete combustion burn for more power, better fuel economy and lower emissions. Provides essential lubricity to internal engine components. To add more power, mpg and longer engine life in warm weather conditions, use our regular Lucas Fuel Treatment. This product should more than pay for itself in increased fuel mileage alone.

Diesel Fuel Supplement +Cetane Boost is a winterizer/antigel that is used in the cold winter months to prevent fuel gelling and keep fuel-filters from plugging with ice and wax. When temperatures drop, paraffin (wax) in ULSD fuel will gel stopping fuel from flowing through the engine, and water in the fuel can freeze on the facings of fuel-filters, blocking fuel flow. It provides trouble-free winter operation for diesel fuel. Diesel Fuel Supplement +Cetane Boost is intended for use only during cold winter months when temperatures drop below +30F. Use Diesel Kleen +Cetane Boost (in the silver bottle) for peak performance in non-winter months. If your vehicle will not start or gain power in cold temperatures, use Diesel 911 (in the red bottle).

ATP Transmission Components are exact fit, no compromise replacement parts

Total injector cleaner and performance improver. Endorsed by Cummins. Cleans dirty injectors and prevents injector sticking. Removes both internal and external deposits on fuel injectors. Boosts power. Restores lost power and fuel economy. Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear. Effective in all diesel fuels. Treats up to 100 gallons.

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

ATP Transmission Components are exact fit, no compromise replacement parts

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

LUBEGARD(R) Synthetic Automatic Transmission Fluid Protectant is a concentrated additive package infused with superior seal conditioners and friction modifiers. This unique product restores additive content to used ATF and enhances new ATF resulting in improved performance and smoother, more consistent shifting. It can safely be added to any automatic transmission fluid (ATF) including full synthetic, semi synthetic, conventional, and low viscosity fluids except Ford Type F or CVT. LUBEGARD(R) Synthetic Automatic Transmission Fluid Protectant is engineered to raise the thermal and oxidative stability level of automatic transmission fluids, so when it operates at elevated temperatures, it does not thin out and pyrolize, burn, or react with oxygen and form deposits. It is formulated with proprietary Liquid Wax Esters (LXE(R)) that are unique because of their natural lubricity, high viscosity index, and high flash and fire points.

ATP Transmission Components are exact fit, no compromise replacement parts

OEM Extended Life - EURO I Concentrate Antifreeze/Coolant is specifically engineered for use in BMW, Jaguar, Mercedes-Benz, Mini, Smart, Volvo and other newer European model gasoline and light duty diesel powered vehicles requiring a nitrite, amine and phosphate (NAP) free, OAT engine coolant; The color-coded packaging for the recommended vehicles, make it easier for you to find the right match for your vehicle; This ethylene glycol based product uses low silicate Organic Acid Technology (OAT) to provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals, including aluminum; When properly diluted and added as an initial fill and maintained in accordance with engine manufacturer's maintenance recommendation, OEM EURO I provides up to 150,000 miles or 5 years service life protection in automotive applications; Meets or exceeds performance requirements ASTM D3306, D6210-10 and D7583; BS6580 and is recommended for use and fully compatible with product meeting VW TL774G+; For best results, do not mix with conventional high pH, phosphate, borate or silicate based coolants; OEM takes the guesswork out of finding the right antifreeze/coolant with the online EasyMatch tool that guarantees to find the right color-coded match in three simple steps. Trust the experts at OEM. The right match for the right vehicle. Yours.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

Lucas Fuel Treatment is for gasoline and diesel fuel. It does not contain alcohol, solvents, kerosene, diesel fuel or anything else that would be useless or harmful to engines. Low sulphur diesel fuel and reformulated gasolines have had the polymers removed from them, not because the polymers were harmful but because they were attached to the aromatics (fumes) in the fuels. In their zest to rid our air of gasoline and diesel fumes, our government has stripped our fuel of its main lubricants and, in the process, a great deal of its power. It replaces those polymers with a concentrate that makes the fuel slicker and more powerful than it was originally. In fact, the user usually picks up more than enough fuel mileage to pay for the fuel treatment itself. Lucas Fuel Treatment lubricates rings and cylinder walls for longer life. It causes more combustion for more power and higher fuel mileage with FEWER EMISSIONS. Lucas Fuel Treatment cleans and lubricates valves, pumps, carburetors, injectors and compression rings. It is an absolute must for rotary pumps! It safely replaces the need for lead in older engines.

Lucas Transmission Fix contains no solvents or anything else that would be harmful to an automatic transmission. It is a thermal stable blend of petroleum-extracted additives designed to correct existing problems and prevent new ones in automatic transmissions. Lucas Transmission Fix stops slip, hesitation and rough shifting in worn transmissions. It completely eliminates most seal leaks and lowers operating temperatures in hard working units. A must for motor homes and commercial vehicles. Lucas Transmission Fix is excellent for preventative maintenance and will extend fluid life up to four times longer. It also extends needed protection to planetary gears. One 24 oz. bottle of Lucas Transmission Fix can be added to existing fluid without draining. A second bottle may be necessary in large or badly worn transmissions. In smaller transmissions (compact or sub-compact vehicles), use 12 oz. Lucas Transmission Fix is also excellent for light duty manual transmissions using automatic transmission fluid or motor oil as a lubricant. For easier shifting and extended transmission life drain transmission, install one 24-ounce bottle of Lucas Transmission Fix and top off with A.T.F. or motor oil.

LUBEGARD(R) Instant Shudder FixxTM is a concentrated friction modifier formulated specifically for eliminating torque converter shudder problems in automatic transmissions. It is the #1 shudder fix used by professionals.

Lucas Octane Booster is a genuine performance enhancer! It has been tested and proven to deliver at least three times more Boost than most other brands. It is suitable for use in fuel injected, carbureted, throttle body and rotary engines. It?s safe for turbos, oxygen sensors and catalytic converters. Lucas Octane Booster contains specific upper cylinder lubricants that ensure easier piston travel and valve seat protection. It also ensures maximum life and performance from pumps, injectors and carburetors. Lucas Octane Booster eliminates spark knocks, pinging and dieseling. It promotes clean fuel burn for fewer emissions and more MPG. Use with each fill-up for maximum performance and fuel mileage. It treats up to 25 gallons of leaded or unleaded gasoline. Lucas Octane Booster is safe for use in any engine on the track or on the street. Remember: When comparing other brands of octane booster, 10 points equal only one octane number. Not recommended in 2-Stroke engines.

Lucas Fuel Treatment is for gasoline and diesel fuel. It does not contain alcohol, solvents, kerosene, diesel fuel or anything else that would be useless or harmful to engines. Low sulphur diesel fuel and reformulated gasolines have had the polymers removed from them, not because the polymers were harmful but because they were attached to the aromatics (fumes) in the fuels. In their zest to rid our air of gasoline and diesel fumes, our government has stripped our fuel of its main lubricants and, in the process, a great deal of its power. It replaces those polymers with a concentrate that makes the fuel slicker and more powerful than it was originally. In fact, the user usually picks up more than enough fuel mileage to pay for the fuel treatment itself. Lucas Fuel Treatment lubricates rings and cylinder walls for longer life. It causes more combustion for more power and higher fuel mileage with FEWER EMISSIONS. Lucas Fuel Treatment cleans and lubricates valves, pumps, carburetors, injectors and compression rings. It is an absolute must for rotary pumps! It safely replaces the need for lead in older engines.