Functional Fluid, Lubricant, Grease (including Additives)

Removes deposits in cooling systems of all water cooled engines. It removes scale, grease, sludge and other deposits to allow restored performance and proper cooling performance.

Fuel Stabilizer is for gasoline engines that keeps stored fuel fresh. For storage and everyday use in all two and four cycle engines.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature and with stainless steel, titanium and nickel alloys.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

A radiator flush tee is a convenient tool for thoroughly flushing the entire coolant system. They are available in a variety of popular sizes and assortments. Check the product details to select the right flush tee(s) for your needs.

Complete kit contains everything required for making professional-quality permanent repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 10 minutes and cure in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs cracks up to 4" in length and holes up to 3/8 " in diameter. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. Fast curing product with gelling of mixed adhesive in 5 6 minutes and fixturing in 9 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125". Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.