Functional Fluid, Lubricant, Grease (including Additives)

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

1) Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance, 2) Excellent resistance to oxidation and thermal breakdown provides long fluid life and extended protection, 3) Provides superior cleanliness, keeping the transmission free of sludge and varnish deposits, 4) Advanced anti-wear technology provides maximum protection to gears and bearings, 5) Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

Valvoline ULV is a full synthetic, ultra low viscosity transmission fluid specifically engineered for high speed automatic transmissions. Formulated to meet the performance requirements of the latest 9 & 10 speed transmission designs, including the Ford/GM 10R80 found in select Ford F-150 and Raptor trucks.

1) Outstanding anti-shudder performance and smooth shifting, 2) Excellent resistance to oxidation and thermal breakdown, providing longer fluid life, extended protection and optimal fuel efficiency, 3) Superior cleanliness that keeps the transmission free from sludge and varnish so that the transmission stays clean and functions properly, 4) Excellent seal compatibility and conditioning to reduce the risk of fluid leaks from seal shrinkage, hardening and cracking

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON, DEXRON-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Valvoline ATF for MERCON V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON SP, MERCON LV, MERCON ULV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON V, MERCON, DEXRON-III, DEXRON-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON or MERCON fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

Valvoline CVT fluid is designed for today's technologically advanced variable transmissions. It is formulated with full-synthetic, premium base oils, long-life friction modifiers, unique anti-wear additives and shear stable viscosity modifiers that help prevent oil film breakdown. Recommended for use in the following CVT applications: Audi and VW (TL 52180 G 052 180), Ford (CVT30/Mercon C), Subaru (Lineartronic CVTF), Honda (HMMF), Nissan (NS-2 and NS-3), Mitsubishi (CVTF-J1/SP-III), BMW Mini Cooper EZL 799), Hyundai and Kia (SP-III), Suzuki (TC/NS-2/CVT Green1), Dodge, Jeep (NS-2/CVTF+4), GM Saturn (DEX-CVT), Ford (CVT23), and Mercedes Benz (236.20).

Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Filtration is the foundation of an effective maintenance program, helping equipment remain closer to new condition for a longer period of time. Filtration is more than filters. WIX supplemental items include bases, connectors, installation aides, air filter wraps, bowls, supplemental additives, pressure gauges and test kits. These items aid filter installation, extend useful service life, or provide data to assist in determining effective service life.

Valvoline ATF+4 is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified. Recommended for use in the following applications: Mopar ATF+ MS 7176, ATF+2 MS 7176, ATF+3 and ATF+4.

Valvoline Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. Recommended for use in the following applications: Ford specifications M2C33-F, M2C33-G and where Ford Type F fluids are recommended. Other applications include air compressors, general purpose hydraulics and power steering system.

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.