Functional Fluid, Lubricant, Grease (including Additives)

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Valvoline ATF+4 is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified. Recommended for use in the following applications: Mopar ATF+ MS 7176, ATF+2 MS 7176, ATF+3 and ATF+4.

Valvoline Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. Recommended for use in the following applications: Ford specifications M2C33-F, M2C33-G and where Ford Type F fluids are recommended. Other applications include air compressors, general purpose hydraulics and power steering system.

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.