Functional Fluid, Lubricant, Grease (including Additives)

A thermally stable, extreme pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.

Outstanding thermal stability for cleanliness and long service life; Extreme pressure additives help protect from shock loads; Gear teeth wear protection from pitting and scouring; Recommended for differentials and non-synchronized manual transmissions where an API GL-5 or API GL-4 fluid is specified.; A thermally stable, extreme-pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.;

• Outstanding thermal stability for cleanliness and longer service life
• Reduced chattering in limited-slip differentials
• Gear teeth wear protection from pitting and scouring
• All hypoid differentials (conventional and limited slip) and manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or MT-1 fluid is specified

A thermally stable, extreme pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.

Lucas SAE 85W-140 Plus Gear Oil is a technical blend of oils and additives designed to give longer oil life and longer component life with less power draw. It is formulated with special anti-wear agents and anti- seize agents not found in common gear oils. Lucas SAE 85W-140 Plus Gear Oil contains special lubricity agents for less wear, less heat, less power usage and longer bearing life. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Lucas SAE 85W-140 Plus Gear Oil is ideal for older gear boxes. This formula slows or stops all oil leaks and cushions gears to reduce lash in worn gear sets. It is formulated with special ?climbing additives.? This action is especially important in power dividers and hypoid gears. Lucas SAE 85W-140 Plus Gear Oil resists breakdown from contact with water. It will blend with other gear oils, even synthetics. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Mineral based gear oil provides accurate function and protection at any temperature even during high torque loads. Consistent viscosity and multifunctional EP additives guarantee a strong lubricating film for maximum wear protection.

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended for any hi-load transmission or differential in race and track vehicles or whenever added protection is needed.

Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Stops Electrical Failures. A inMUSTin for all electronic and standard ignitions. Meets OEM specifications. Only Dielectric Silicone works on HIGH ENERGY IGNITION SYSTEMS. Prevents mis-readings. Seals out moisture and corrosion. Suggested Applications: Sensor connections, computer connections, solenoids, truck pigtails, plugs, ignition modules and coils, marine connections, lighting systems, batteries, and terminals.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip