Functional Fluid, Lubricant, Grease (including Additives)

Total injector cleaner and performance improver. Endorsed by Cummins. Cleans dirty injectors and prevents injector sticking. Removes both internal and external deposits on fuel injectors. Boosts power. Restores lost power and fuel economy. Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear. Effective in all diesel fuels. Treats up to 100 gallons.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

Lucas Fuel Treatment is for gasoline and diesel fuel. It does not contain alcohol, solvents, kerosene, diesel fuel or anything else that would be useless or harmful to engines. Low sulphur diesel fuel and reformulated gasolines have had the polymers removed from them, not because the polymers were harmful but because they were attached to the aromatics (fumes) in the fuels. In their zest to rid our air of gasoline and diesel fumes, our government has stripped our fuel of its main lubricants and, in the process, a great deal of its power. It replaces those polymers with a concentrate that makes the fuel slicker and more powerful than it was originally. In fact, the user usually picks up more than enough fuel mileage to pay for the fuel treatment itself. Lucas Fuel Treatment lubricates rings and cylinder walls for longer life. It causes more combustion for more power and higher fuel mileage with FEWER EMISSIONS. Lucas Fuel Treatment cleans and lubricates valves, pumps, carburetors, injectors and compression rings. It is an absolute must for rotary pumps! It safely replaces the need for lead in older engines.

Lucas Octane Booster is a genuine performance enhancer! It has been tested and proven to deliver at least three times more Boost than most other brands. It is suitable for use in fuel injected, carbureted, throttle body and rotary engines. It?s safe for turbos, oxygen sensors and catalytic converters. Lucas Octane Booster contains specific upper cylinder lubricants that ensure easier piston travel and valve seat protection. It also ensures maximum life and performance from pumps, injectors and carburetors. Lucas Octane Booster eliminates spark knocks, pinging and dieseling. It promotes clean fuel burn for fewer emissions and more MPG. Use with each fill-up for maximum performance and fuel mileage. It treats up to 25 gallons of leaded or unleaded gasoline. Lucas Octane Booster is safe for use in any engine on the track or on the street. Remember: When comparing other brands of octane booster, 10 points equal only one octane number. Not recommended in 2-Stroke engines.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Lucas Fuel Treatment is for gasoline and diesel fuel. It does not contain alcohol, solvents, kerosene, diesel fuel or anything else that would be useless or harmful to engines. Low sulphur diesel fuel and reformulated gasolines have had the polymers removed from them, not because the polymers were harmful but because they were attached to the aromatics (fumes) in the fuels. In their zest to rid our air of gasoline and diesel fumes, our government has stripped our fuel of its main lubricants and, in the process, a great deal of its power. It replaces those polymers with a concentrate that makes the fuel slicker and more powerful than it was originally. In fact, the user usually picks up more than enough fuel mileage to pay for the fuel treatment itself. Lucas Fuel Treatment lubricates rings and cylinder walls for longer life. It causes more combustion for more power and higher fuel mileage with FEWER EMISSIONS. Lucas Fuel Treatment cleans and lubricates valves, pumps, carburetors, injectors and compression rings. It is an absolute must for rotary pumps! It safely replaces the need for lead in older engines.