Functional Fluid, Lubricant, Grease (including Additives)

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The fluid is a green color.

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

Anti-wear hydraulic oil formulated for use in a wide variety of hydraulic systems. Are zinc-based, non-detergent oils with excellent oxidation and demulsibility characteristics and contain rust and foam inhibitors.

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

Permatex Red High Strength Threadlocker is OEM specified. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

MAG 1 Snow Plow Specialty lubricants are specially formulated to meet tough standards for outstanding protection and performance

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Ultra Slick adheres to component surfaces to prevent scuffing and galling during initial start-up. This high quality formulation meets or exceeds OEM performance specs for engine assembly lubricants.

Never Lose the Straw Again using WD-40 Multi-Use Product with SMART STRAW?SPRAYS 2 WAYS technology. It features a permanently attached straw that sprays two ways. Simply flip it up for a precision stream and down for a regular spray action. Discover how one of the world's smartest products just got smarter.