Functional Fluid, Lubricant, Grease (including Additives)

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

Valvoline ATF+4 is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified. Recommended for use in the following applications: Mopar ATF+ MS 7176, ATF+2 MS 7176, ATF+3 and ATF+4.

Valvoline Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. Recommended for use in the following applications: Ford specifications M2C33-F, M2C33-G and where Ford Type F fluids are recommended. Other applications include air compressors, general purpose hydraulics and power steering system.

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Lucas Power Steering Fluid with Conditioners is formulated with the highest quality synthetic base oils and additives to help prevent power steering unit leaks, provide smooth operation and eliminate squealing. Our unique chemistry prolongs fluid life, improves fluid shear stability and improves fluid oxidation to minimize sludge and varnish formation. It reduces parts wear and extends equipment life. It cleans and smoothes internal springs and valves to help eliminate sticking and conditions seals to minimize or stop small leaks. Lucas Power Steering Fluid with Conditioners also reduces sluggish operation and noise and chatter. It contains an effective foam inhibitor and maintains cold temperature properties for power steering fluid. Designed for use in both new and older vehicles. Can be used in Honda Systems.

Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. Required for modern high energy ignition systems.

Global Synthetic Power Steering Fluid is specially formulated to meet the specifications of European OEM?s requiring high technology fluids that enable extended change intervals. This premium synthetic power steering fluid exceeds requirements and is suitable for use in all other vehicles. Honda fluid is recommended for Honda and Acura vehicles.Penray Global Synthetic Power Steering Fluid Provides exceptional viscosity stability over a wide temperature range, with improved flow at low temperatures. Excellent anti-wear properties ensure suitability for use as hydraulic fluid in suspension systems, traction control units and as shock absorber fluid.Meets or exceeds performance standards and service requirements of European OEM?s such as: Audi, Mercedes Benz and Volvo.