Functional Fluid, Lubricant, Grease (including Additives)

Permatex Red High Strength Threadlocker is OEM specified. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

Valvoline ATF+4 is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified. Recommended for use in the following applications: Mopar ATF+ MS 7176, ATF+2 MS 7176, ATF+3 and ATF+4.

Valvoline Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. Recommended for use in the following applications: Ford specifications M2C33-F, M2C33-G and where Ford Type F fluids are recommended. Other applications include air compressors, general purpose hydraulics and power steering system.

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

WD-40?Specialist?Water Resistant Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces, including rubber, plastic and vinyl better than leading competitors. Our silicone spray dries fast and leaves a clear, non-staining film that doesn't stick or make a mess, so it won't attract dirt. Effective in a temperature range from -100degreeF to 500degreeF, it's ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more, and is 50-state VOC compliant 4 BALL WEAR The test and what it means: This test measures the wear protection of a fluid on a metal surface. A steel ball is pressed with force against three stationary steel balls and is rotated at 1200 rpm for 60 minutes. WD-40 Specialist Water Resistant Silicone is far superior to the competition leaving the smallest scar, representing its ability to protect your machinery and other moving parts better than the rest. EXTREME PRESSURE The test and what it means: This test measures the load carrying properties of a lubricant. WD-40 Specialist Water Resistant Silicone demonstrates that it is able to withstand higher pressure than the leading competitors!

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

OE Engineered and Formulated Vehicle Specific Automatic Transmission Fluid; Preferred by Factory and Professional Technicians