Functional Fluid, Lubricant, Grease (including Additives)

Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals.

Lucas Heavy Duty Oil Stabilizer is a 100% petroleum product developed and perfected through

Lucas SAE 85W-140 Plus Gear Oil is a technical blend of oils and additives designed to give longer oil life and longer component life with less power draw. It is formulated with special anti-wear agents and anti- seize agents not found in common gear oils. Lucas SAE 85W-140 Plus Gear Oil contains special lubricity agents for less wear, less heat, less power usage and longer bearing life. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Lucas SAE 85W-140 Plus Gear Oil is ideal for older gear boxes. This formula slows or stops all oil leaks and cushions gears to reduce lash in worn gear sets. It is formulated with special ?climbing additives.? This action is especially important in power dividers and hypoid gears. Lucas SAE 85W-140 Plus Gear Oil resists breakdown from contact with water. It will blend with other gear oils, even synthetics. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Marvel Mystery Oil

Lucas White Lithium Grease is formulated with the highest quality base oils and additives to provide mild extreme pressure properties. The white creamy appearance differentiates it from other products. The product is packaged in 8 ounce squeeze tubes for ease of application. Lucas White Lithium Grease is recommended for use in plain and antifriction bearings operating under moderate load conditions. It is recommended for use in automotive chassis, trucks, tractors and contractor equipment. Not recommended for use in wheel bearings. Our product is truly versatile grease with applications in industrial, automotive and household applications including garage door openers, springs, hinges, etc.

Permanent pour 'n go head gasket & block repair compatible with all types of antifreeze. Repairs cooling system leaks w/3 unique technologies: military-strength fibers nanotechnology & Cool-X Conditioner-the ultimate solution for all coolant leaks.

A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. Protects against uneven pad wear.

Lucas Pure Synthetic Oil Stabilizer is perfect for use in new equipment that requires synthetic oil or any equipment that needs enhanced performance. It can be used to protect new and used heavy duty and high performance transmissions, gear boxes and engines. This product controls heat and wear in motorcycles, air-cooled engines and all drive-train components. Lucas Pure Synthetic Oil Stabilizer reduces friction for more power and more MPG. It eliminates dry starts in new engines and provides the extra protection needed for import and domestic engines requiring newer, lighter engine oils. Lucas Pure Synthetic Oil Stabilizer was originally designed for the racing industry. Light, slick and long-lasting with a film strength that stands up to high temperatures and pressures in extreme situations and since it?s pure synthetic, it won?t void warranties! Lucas Pure Synthetic Oil Stabilizer controls noise, heat and wear in manual transmissions, differentials and transfer cases. It stabilizes oil pressure for better performance in today?s electronically controlled gasoline and diesel engines. It eliminates hesitation, rough idle, stalling and loss of fuel mileage caused by low or fluctuating oil pressure. No special limited slip additive needed when used in differentials. In badly whining differentials use our original Heavy Duty Oil Stabilizer. Use Lucas Pure Synthetic Oil Stabilizer in cold weather applications for easier cranking and maximum protection from all wear problems associated with cold dry starts.

Disc Brake Quiet forms a water resistant, high-temperature film that absorbs noise while quieting squeaks & squeals. Specially formulated to dampen the vibrations that cause brake noise. For use on the back of non-shimmed disc pads.

K-Seal HD (heavy duty) for large capacity cooling systems such as trucks/tractors, industrial, AG, and RV engines.
K-Seal HD is the best-selling trade trusted permanent total coolant leak repair. The super concentrated formula not only permanently repairs blown head gaskets it also seals leaks in the radiator, heater core, head, block, water pump and freeze plugs. K-Seal HD mixes with all antifreeze / coolant so there is no need to drain or flush the system before or after treatment, and just one bottle is all you need for engines up to 60 quarts. Simple to use simply Shake, Pour and Go! K-Seal HD can be added via the radiator, top hose or via the expansion tank provided it is safe to do so.
K-Seal HD uses a unique ceramic formula and contains NO sodium silicate or liquid glass so it will positively not clog any part of the cooling system. K-Seal HD also works on Hard Plastic and has been independently tested at Brighton University and conforms to the American Standard ASTM D-3147 for Stop-Leak Additives for Engine Coolants. Guarantee - Once we make the repair it is for the life of the engine.

---

• Heavy Duty Application - Truck/Tractor, Industrial, AG, RV and Large Capacity Engines
• Positively Will NOT Clog any Part of the Cooling System
• No Draining / No Flushing
• Unique Ceramic Formula with NO Sodium Silicate or Liquid Glass
• Independently Tested to Meet ASTM D3147
• Pre Packed in Attractive 6 Pack Counter Display
• Permanently Seals Holes and Cracks up to 1/32" in - Head Gaskets, Cracked Blocks, Leaking Radiators, Leaking Heater Cores, Leaking Freeze Plugs and Leaking Water Pump Casings.
• Easy to Use - Just Shake Pour & Go!
• Can be Added to the Overflow Tank
• Can be Added to a Hot or Cold Engine (provided safe to open)