Functional Fluid, Lubricant, Grease (including Additives)

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 3 brake fluid: * Complies with Federal Motor Vehicle Safety standard 116, surpasses SAE Spec. J1703 * Minimum wet boiling point of 284?F (140?C) * Exceeds highest standards of performance and safety

Perfect Stop DOT 4 brake fluid offers * Superior premium performance * Required for many European, Japanese, and high performance vehicles * Exceeds highest standards of performance and safety

Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.

Stops Electrical Failures. A inMUSTin for all electronic and standard ignitions. Meets OEM specifications. Only Dielectric Silicone works on HIGH ENERGY IGNITION SYSTEMS. Prevents mis-readings. Seals out moisture and corrosion. Suggested Applications: Sensor connections, computer connections, solenoids, truck pigtails, plugs, ignition modules and coils, marine connections, lighting systems, batteries, and terminals.

Lubricates and eliminates squeaking and binding caused by friction. Film is clean and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. Protects against uneven pad wear.

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

Fast acting multi-purpose lubricant. This all in one product quickly penetrates, lubricates, stops squeaks, fights corrosion & loosens rusted parts.

Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. Required for modern high energy ignition systems.

A specially developed synthetic grease with a high-tech formula for use in disc & drum brake systems. High temperature grease is plastic & rubber safe. Use on metal to metal contact points and sliding surfaces. Resists moisture and will not washout.

Complete kit contains everything required for making professional-quality permanent repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 10 minutes and cure in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs cracks up to 4" in length and holes up to 3/8 " in diameter. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. Fast curing product with gelling of mixed adhesive in 5 6 minutes and fixturing in 9 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125". Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.

Never Lose the Straw Again using WD-40 Multi-Use Product with SMART STRAW?SPRAYS 2 WAYS technology. It features a permanently attached straw that sprays two ways. Simply flip it up for a precision stream and down for a regular spray action. Discover how one of the world's smartest products just got smarter.