Functional Fluid, Lubricant, Grease (including Additives)

Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.

Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals.

Lucas SAE 85W-140 Plus Gear Oil is a technical blend of oils and additives designed to give longer oil life and longer component life with less power draw. It is formulated with special anti-wear agents and anti- seize agents not found in common gear oils. Lucas SAE 85W-140 Plus Gear Oil contains special lubricity agents for less wear, less heat, less power usage and longer bearing life. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Lucas SAE 85W-140 Plus Gear Oil is ideal for older gear boxes. This formula slows or stops all oil leaks and cushions gears to reduce lash in worn gear sets. It is formulated with special ?climbing additives.? This action is especially important in power dividers and hypoid gears. Lucas SAE 85W-140 Plus Gear Oil resists breakdown from contact with water. It will blend with other gear oils, even synthetics. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

NULL

Permanent pour 'n go head gasket & block repair compatible with all types of antifreeze. Repairs cooling system leaks w/3 unique technologies: military-strength fibers nanotechnology & Cool-X Conditioner-the ultimate solution for all coolant leaks.

Sil-Glyde Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. will not melt, freeze, gum, or run off. Performs from -20 deg F to +400 deg F. Grease consistency stays put and will not drip off like silicone oils. Harmless to rubber and car finishes. Suggested applications: Trunk seals, rubber bumpers, speedometer cables, brake parts, window channels, hood strips and pads, rubber gaskets, and belts.

Global Synthetic Power Steering Fluid is specially formulated to meet the specifications of European OEM?s requiring high technology fluids that enable extended change intervals. This premium synthetic power steering fluid exceeds requirements and is suitable for use in all other vehicles. Honda fluid is recommended for Honda and Acura vehicles.Penray Global Synthetic Power Steering Fluid Provides exceptional viscosity stability over a wide temperature range, with improved flow at low temperatures. Excellent anti-wear properties ensure suitability for use as hydraulic fluid in suspension systems, traction control units and as shock absorber fluid.Meets or exceeds performance standards and service requirements of European OEM?s such as: Audi, Mercedes Benz and Volvo.

K-Seal HD (heavy duty) for large capacity cooling systems such as trucks/tractors, industrial, AG, and RV engines.
K-Seal HD is the best-selling trade trusted permanent total coolant leak repair. The super concentrated formula not only permanently repairs blown head gaskets it also seals leaks in the radiator, heater core, head, block, water pump and freeze plugs. K-Seal HD mixes with all antifreeze / coolant so there is no need to drain or flush the system before or after treatment, and just one bottle is all you need for engines up to 60 quarts. Simple to use simply Shake, Pour and Go! K-Seal HD can be added via the radiator, top hose or via the expansion tank provided it is safe to do so.
K-Seal HD uses a unique ceramic formula and contains NO sodium silicate or liquid glass so it will positively not clog any part of the cooling system. K-Seal HD also works on Hard Plastic and has been independently tested at Brighton University and conforms to the American Standard ASTM D-3147 for Stop-Leak Additives for Engine Coolants. Guarantee - Once we make the repair it is for the life of the engine.

---

• Heavy Duty Application - Truck/Tractor, Industrial, AG, RV and Large Capacity Engines
• Positively Will NOT Clog any Part of the Cooling System
• No Draining / No Flushing
• Unique Ceramic Formula with NO Sodium Silicate or Liquid Glass
• Independently Tested to Meet ASTM D3147
• Pre Packed in Attractive 6 Pack Counter Display
• Permanently Seals Holes and Cracks up to 1/32" in - Head Gaskets, Cracked Blocks, Leaking Radiators, Leaking Heater Cores, Leaking Freeze Plugs and Leaking Water Pump Casings.
• Easy to Use - Just Shake Pour & Go!
• Can be Added to the Overflow Tank
• Can be Added to a Hot or Cold Engine (provided safe to open)

Power Steering Fluid for Honda and Acura helps stop leaks, revatalize old seals and prevent wear, foam and oxidation.

Motor Medic DOT5 Brake Fluid meets or exceeds FMVSS 116 with a 500F Dry Boiling Point. Do not use in ABS systems.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip