Functional Fluid, Lubricant, Grease (including Additives)

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Stops Electrical Failures. A inMUSTin for all electronic and standard ignitions. Meets OEM specifications. Only Dielectric Silicone works on HIGH ENERGY IGNITION SYSTEMS. Prevents mis-readings. Seals out moisture and corrosion. Suggested Applications: Sensor connections, computer connections, solenoids, truck pigtails, plugs, ignition modules and coils, marine connections, lighting systems, batteries, and terminals.

A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. Protects against uneven pad wear.

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

Permatex Red High Strength Threadlocker is OEM specified. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Permatex Blue Medium Strength Threadlocker is OEM specified. It is an all-purpose threadlocker ideal for nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).