Functional Fluid, Lubricant, Grease (including Additives)

A thermally stable, extreme pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.

Outstanding thermal stability for cleanliness and long service life; Extreme pressure additives help protect from shock loads; Gear teeth wear protection from pitting and scouring; Recommended for differentials and non-synchronized manual transmissions where an API GL-5 or API GL-4 fluid is specified.; A thermally stable, extreme-pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.;

• Outstanding thermal stability for cleanliness and longer service life
• Reduced chattering in limited-slip differentials
• Gear teeth wear protection from pitting and scouring
• All hypoid differentials (conventional and limited slip) and manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or MT-1 fluid is specified

A thermally stable, extreme pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.

Mineral based gear oil provides accurate function and protection at any temperature even during high torque loads. Consistent viscosity and multifunctional EP additives guarantee a strong lubricating film for maximum wear protection.

Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended for any hi-load transmission or differential in race and track vehicles or whenever added protection is needed.

Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

Lucas SAE 85W-140 Plus Gear Oil is a technical blend of oils and additives designed to give longer oil life and longer component life with less power draw. It is formulated with special anti-wear agents and anti- seize agents not found in common gear oils. Lucas SAE 85W-140 Plus Gear Oil contains special lubricity agents for less wear, less heat, less power usage and longer bearing life. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Lucas SAE 85W-140 Plus Gear Oil is ideal for older gear boxes. This formula slows or stops all oil leaks and cushions gears to reduce lash in worn gear sets. It is formulated with special ?climbing additives.? This action is especially important in power dividers and hypoid gears. Lucas SAE 85W-140 Plus Gear Oil resists breakdown from contact with water. It will blend with other gear oils, even synthetics. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

gpd chemicals are designed to meet OE specifications and standards. Using the correct chemical for your application will ensure proper function. gpd recommends properly flushing all chemicals from the A/C system before recharging.

8 oz High Viscosity-150; Meets or exceeds OEM specifications; Provides superior protection against compressor wear; Contains ICE32 premium lubricant enhancer for ultimate performance & friction reduction

8 oz Low Viscosity-46; Meets or exceeds OEM specifications; Provides superior protection against compressor wear; Contains ICE32 premium lubricant enhancer for ultimate performance & friction reduction

Permatex Red High Temperature Threadlocker is OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents fasteners 5/8" to 1" (16mm to 25mm) from loosening due to shock, severe vibration and heat stress. Advanced formulation for high performance and heavy-duty applications that operate at higher temperatures. Protects threads from corrosion. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. Protects against uneven pad wear.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Permatex Red High Strength Threadlocker is OEM specified. High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221, Mil-Spec 46163A, Type I, Grade K.