Functional Fluid, Lubricant, Grease (including Additives)

A thermally stable, extreme pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.

Outstanding thermal stability for cleanliness and long service life; Extreme pressure additives help protect from shock loads; Gear teeth wear protection from pitting and scouring; Recommended for differentials and non-synchronized manual transmissions where an API GL-5 or API GL-4 fluid is specified.; A thermally stable, extreme-pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.;

• Outstanding thermal stability for cleanliness and longer service life
• Reduced chattering in limited-slip differentials
• Gear teeth wear protection from pitting and scouring
• All hypoid differentials (conventional and limited slip) and manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or MT-1 fluid is specified

A thermally stable, extreme pressure (EP) gear lubricant that withstands severe temperatures and shock loading while providing excellent anti-wear, anti-scuffing, rust and corrosion protection.

Mineral based gear oil provides accurate function and protection at any temperature even during high torque loads. Consistent viscosity and multifunctional EP additives guarantee a strong lubricating film for maximum wear protection.

Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended for any hi-load transmission or differential in race and track vehicles or whenever added protection is needed.

Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals.

Lucas SAE 85W-140 Plus Gear Oil is a technical blend of oils and additives designed to give longer oil life and longer component life with less power draw. It is formulated with special anti-wear agents and anti- seize agents not found in common gear oils. Lucas SAE 85W-140 Plus Gear Oil contains special lubricity agents for less wear, less heat, less power usage and longer bearing life. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Lucas SAE 85W-140 Plus Gear Oil is ideal for older gear boxes. This formula slows or stops all oil leaks and cushions gears to reduce lash in worn gear sets. It is formulated with special ?climbing additives.? This action is especially important in power dividers and hypoid gears. Lucas SAE 85W-140 Plus Gear Oil resists breakdown from contact with water. It will blend with other gear oils, even synthetics. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

Plumbing Antifreeze MAX prevents damage to drains and freshwater lines caused by freezing water in seasonal homes, cottages, chalets, mobile homes, recreational vehicles, boats, septic systems and swimming pool filtration and heating systems; Not designed for elevated temperature uses such as boilers, solar systems, evaporator coolers and heat pump loop systems; A mixture of propylene glycol and water, it is completely non-toxic, salt-free** and if used as directed, it is not harmful to the environment; Plumbing antifreeze does not have a definite freezing point but turns thick and viscous as the temperature drops; For this reason it is correct to refer to the burst protection rather than freeze point; This formulation provides burst protection up to -100°F, when undiluted; In the fall, the plumbing system should be drained of as much water as possible; Prevents pipes from bursting in cold weather; Ensure antifreeze is used undiluted to avoid reducing the level of burst protection; For recreational vehicles read the owners manual for further details; Bring container to room temperature before using.**Salt solutions known as brines are extremely corrosive to metals and cannot be rendered non-corrosive.

Lucas Synthetic SAE 75W-90 Gear Oil is a pure-synthetic, non-foaming, super slick, long lasting lubricant designed especially for heavy-duty or high performance applications where other gear lubricants just aren?t good enough. Contains a special additive package that cushions gears and resists ?squeezing out? under extreme pressure situations where other gear lubricants just don?t hold up. We have improved the high speed shock load and significantly improved anti-wear performance which provides the ultimate protection to the gear components. Especially designed to stand up to high temperatures without losing its lubricity. Excellent for use in limited slip differentials. EXCEEDS ALL GL CLASSIFICATIONS API MT-1, API GL-5, MIL-PRF-2105E, MACK GO-G, PG-2 Limited Slip

OEM Extended Life - EURO I Concentrate Antifreeze/Coolant is specifically engineered for use in BMW, Jaguar, Mercedes-Benz, Mini, Smart, Volvo and other newer European model gasoline and light duty diesel powered vehicles requiring a nitrite, amine and phosphate (NAP) free, OAT engine coolant; The color-coded packaging for the recommended vehicles, make it easier for you to find the right match for your vehicle; This ethylene glycol based product uses low silicate Organic Acid Technology (OAT) to provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals, including aluminum; When properly diluted and added as an initial fill and maintained in accordance with engine manufacturer's maintenance recommendation, OEM EURO I provides up to 150,000 miles or 5 years service life protection in automotive applications; Meets or exceeds performance requirements ASTM D3306, D6210-10 and D7583; BS6580 and is recommended for use and fully compatible with product meeting VW TL774G+; For best results, do not mix with conventional high pH, phosphate, borate or silicate based coolants; OEM takes the guesswork out of finding the right antifreeze/coolant with the online EasyMatch tool that guarantees to find the right color-coded match in three simple steps. Trust the experts at OEM. The right match for the right vehicle. Yours.

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.