Shocks & Struts

Arnott's completely rebuilt rear air shock for GM vehicles features a new rubber air spring bladder manufactured exclusively by Goodyear. This remanufactured shock is not a passive replacement. This air shock will plug directly into the factory electronic damping system.

AS-3430 is a new, Arnott engineered, aftermarket air suspension shock for the rear of the 2000-2014 Cadillac, Chevrolet and GMC SUV's including the Escalade, Tahoe, Suburban and Yukon (SWB/LWB) with Autoride and the 2007-2014 Cadillac, Chevrolet and GMC SUV's including the Escalade, Tahoe, Suburban and Yukon (SWB/LWB) with Magneride. This new assembly is built with premium components precisely tuned to ride like the OE, premium, multi-ply Goodyear air sleeve, long-lasting O-rings and bump stop, heavy-duty crimping rings, and a diecast top mount made of aluminum. This universal shock, which fits both the left and right side, is designed and assembled in the USA and includes an upgraded harness to avoid Autoride/Magneride burnout. Arnott's replacement GMC rear air shock works with the vehicle's auto leveling functionality.

Arnott's new economical rear air shock replacement for GM vehicles with Autoride suspension will convert the rear of the vehicle from electronic air shocks to passive air shocks. This adjustable shock will keep the vehicle at the proper height and provide a smooth, comfortable ride. This easy-to-install shock includes an Electronic Bypass Module (EBM) to turn off dashboard warning lights, and an instruction manual. Arnott recommends replacing rear shocks in pairs if converting the Autoride suspension to this passive air shock. Not applicable for vehicles w/Magneride suspension.

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Kit Contents: 1 25 ft. coil 3/16 in. NiCopp tubing; tube nuts for SAE thread, inverted flare as follows: 10 3/8 in. X 24, 2 7/16 in. X 24, 2 9/16 in. X 18, 2 1/2 in. X 20. AGS coils are the same copper nickel alloy tubing as used in our pre-made lines. AGS is the industry leader in the automotive aftermarket for NiCopp brake, fuel, and transmission lines. This NiCopp kit is an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. Use to fabricate 3/16 Domestic, European, Japanese, British, and adapter brake lines. AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2 Percent nickel, 1.4 Percent iron, 0.8 Percent manganese, and 88.6 Percent copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines. Nickel-copper, commonly referred to as 90-10 copper, has been used on several European vehicle brake systems since the 1970's, including: Volvo, Audi, Porsche, and Aston Martin. NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used, including brake, fuel and transmission systems. NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired.-NiCopp Does Not Rust or Corrode-DOT Approved for Hydraulic Brake Systems-Bends 58 Percent Easier than Steel Tubing and is available in 25, 50, and 100 ft lengths-Finished Lines Available for Domestic and Import. NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2871.

Kit Contents: 1 25 ft. coil 1/4 in. NiCopp tubing; tube nuts for SAE thread, inverted flare as follows: 10 7/16 in. X 24 long, 2 7/16 in. X 24 short, 2 9/16 in. X 18, 2 1/2 in. X 20. AGS coils are the same copper nickel alloy tubing as used in our pre-made lines. AGS is the industry leader in the automotive aftermarket for NiCopp brake, fuel, and transmission lines. This NiCopp kit is an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. Use to fabricate 3/16 Domestic, European, Japanese, British, and adapter brake lines. AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2 Percent nickel, 1.4 Percent iron, 0.8 Percent manganese, and 88.6 Percent copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines. Nickel-copper, commonly referred to as 90-10 copper, has been used on several European vehicle brake systems since the 1970's, including: Volvo, Audi, Porsche, and Aston Martin. NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used, including brake, fuel and transmission systems. NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode-DOT Approved for Hydraulic Brake Systems-Bends 58 Percent Easier than Steel Tubing and is available in 25, 50, and 100 ft lengths-Finished Lines Available for Domestic and Import. NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2871.